• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Brimar EM87

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hey

After taking to bits and old old record deck with built in amp i found a number of tubes in it along with other bits (transformers etc) and the two tubes in it were a ECC83, which i have no problem finding info on and also a Brimar EM87. I carnt find any infomation on this and curious about the light strip on the back.

Any body got any circuit ideas for this? using the ECC83 as the preamp and the EM87 at the output.

Regards
Damon
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.