diyAudio - PSU with Multiple 7805 //

diyAudio (http://www.diyaudio.com/forums/)

- Power Supplies (http://www.diyaudio.com/forums/power-supplies/)

- - PSU with Multiple 7805 // (http://www.diyaudio.com/forums/power-supplies/98481-psu-multiple-7805-a.html)

Ciu	19th March 2007 10:56 PM

PSU with Multiple 7805 //

Hello !

I saw in the schematics of the PSU for DAC's output, something unusual .
The audio output stage(one side) is made with 2 OP Amp AD712, mounted in differential ; the PSU is made of 2x 7815 (Pos rail), 2x 7915 (neg rail )
I don't know why 2 voltage regulators TO220 (1.5A each !) connected // are needed ? Is there any advantage in such topology ?

Thanks for any advice
R.C.

yusuf

24th March 2007 08:47 AM

where can I find mentioned schematic

Ciu	24th March 2007 01:42 PM

PSU 7815

2 Attachment(s)

This is the scheme, with 2 x 7815 (not 7805) connected // to supply One AD712

R.C.

BWRX	24th March 2007 02:17 PM

Theoretically lower output impedance... although I don't know how much it would help considering there are already two large electrolytic caps on the output.

Ciu	24th March 2007 03:43 PM

7815 Reg

2 Attachment(s)

I intend to swap these regulators, with a home-made board, a lm317 (better output noise ) and caps ,solid tantalum 20µf on output.
For the ajusting level output, I have the choice :
_Resistors with 10µ cap //

_Tl431, as the reference source

Any comments ?

Ciu	24th March 2007 03:46 PM

7815 Regulators

2 Attachment(s)

Or this one ?

All times are GMT. The time now is 08:59 AM.