Mr.Mekulic said:Do I need to check anything else ?
Make sure you also check the temperature of the regulator. Keep us posted.
Regards,
Milan
moamps said:
Make sure you also check the temperature of the regulator. Keep us posted.
Regards,
Milan
Exactly. The LM7812 gets very, VERY hot if enough current is being drawn and/or if the input voltage is anything above 18v! Put a heatsink on that hummer and it'll SHINE!
It'll run very well with even a tiny heatsink. The variable regulators can get hot, but not as hot as the standard ones. The variable regulators have a 5A output and the LM78/s/xx/LM9/s/sxx (the standard ones) only have about 1-1.5A output! How do you figure that?
I would still go with either no regulator and just do what the kit says, or run it through a POSITIVE variable regulator (and a NEGATIVE variable regulator if you need to have the +/- balance perfected )
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.