I can either modify your PSU for you, or provide you with the boards or the PCB files for a reasonable amount of money. However, I'm very busy now, I will try to contact you in a few days. I'm sorry.
Note that the transformer has to be disassembled and wound again with different primaries.
Note that the transformer has to be disassembled and wound again with different primaries.
NP, thank you.
I don't have these units at the moment yet, so take your time.
The CX3400 I have converted with someone elses kit has ground loop problems so I figured I'd try yours this time.
Does your PCB work with the DEQ2496 and the DCX2496? As I would like to run both off a stock Delco CD player with optical out added.
Thanks for your time Eva.
Steve
I don't have these units at the moment yet, so take your time.
The CX3400 I have converted with someone elses kit has ground loop problems so I figured I'd try yours this time.
Does your PCB work with the DEQ2496 and the DCX2496? As I would like to run both off a stock Delco CD player with optical out added.
Thanks for your time Eva.
Steve
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.