diyAudio (
-   Power Supplies (
-   -   Datasheet psu, 0.1v to 50v @1a... (

redrabbit 21st April 2006 11:13 AM

Datasheet psu, 0.1v to 50v @1a...
HERE :magnify: :
(page 12, Figure 14)

...My question is, what would come between this regulator circuit, and the power transformer.......bridge and smoothing caps??

...And what :magnet: transformer say you?


peranders 21st April 2006 12:01 PM

You'll need 35-40 VAC, 70-100 VA, 2200-4700 uF in smoothing.

I friend of mine built this PS long time ago and it worked pretty well.

redrabbit 22nd April 2006 02:36 AM

Thanks peranders.

...btw, how could this be turned into a dual polarity supply?
...or is that a drasticly different circuit altogether ?


peranders 22nd April 2006 06:03 AM

You can built two identical PS and then connect them in series. This will give you a dual suuply.

redrabbit 22nd April 2006 08:58 AM

I'm sorry, I meant a bipolar psu....."plus, minus ( and ground, 0v)" volts output.


peranders 22nd April 2006 09:14 PM

I ment that too. :)

redrabbit 26th April 2006 01:32 AM

OK, so using a center tapped tranny....
positive is one psu,
negative is another,
....and 0v (ground) is shared with both.

Correct?? ( :xfingers: )


All times are GMT. The time now is 07:30 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio