|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
23rd December 2005, 09:33 PM
|
#21 | |
|
diyAudio Member
Join Date: Dec 2005
Location: Dankleight
|
Quote:
The MOSFET source swings up and down 400V and carries the secondary side of isolator with it. Then,...back to optical: Fairchild HPCL2611 has 10MHz bandwidth and logic level compatible, just right to feed the MOS driver. It seems you can get logic gate optocouplers one order of magnitude faster than linear ones, if you don't care about analog levels. Joseph |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Delay matching in IR2xxx low and high side gate drivers | Eva | Power Supplies | 8 | 10th June 2007 08:02 PM |
| High side driver ckt using ocs | rejithcv | Power Supplies | 8 | 16th November 2006 02:52 AM |
| how to model fast high frequency op-amps | zilog | Class D | 0 | 28th November 2005 03:53 PM |
| Low side driver as a High side | fr0st | Parts | 0 | 8th May 2004 02:14 PM |
| Fast High-End Design from Elektor May 1997 | JDeV | Solid State | 1 | 12th November 2003 03:43 AM |
| New To Site? | Need Help? |
| Page generated in 0.06303 seconds (62.06% PHP - 37.94% MySQL) with 10 queries |
