Is my DIY PS proper for powering CDROM drive? Is my DIY PS proper for powering CDROM drive? - diyAudio
Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Is my DIY PS proper for powering CDROM drive?
Is my DIY PS proper for powering CDROM drive?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th May 2005, 04:38 PM   #1
dw1narso is offline dw1narso  Indonesia
diyAudio Member
 
Join Date: Mar 2004
Location: Jakarta
Question Is my DIY PS proper for powering CDROM drive?

Hi DIYers,

I need your advice...

I have an old CDROM drive with analog audio out (no digital out, though) that I'm thinking to use it as a cd-player to burn other equipment (to keep my main player life longer).

The CDROM drive need +12VDC (1A) and +5VDC (0.5A), both to the same single GND reference..

I have a spare transformer with 32-25-18-15-CT-15-18-25-32VAC/3Amp secondary, some bridge rectifier and some capacitors of various values.

If I add some 78xx regulators to make a power supply like the attached drawing, will it be proper for the CDROM drive?

Regards,
---
David
Attached Images
File Type: jpg psu12v5v.jpg (12.6 KB, 228 views)
  Reply With Quote
Old 15th May 2005, 12:32 PM   #2
Dark Harroth is offline Dark Harroth  Estonia
diyAudio Member
 
Join Date: Apr 2005
Location: Tallinn
Yes, probably...

But then the 15 volt regulator should be able to supply about 2 Amperes, and the 12 Volt regulator should be able to supply 1,5 Amperes. So both must be mounted on a proper heat sink.

The efficiency of the schematic will lack though, because of the high voltage drop on the regulators. Your CD-ROM can consume max. 14,5 W of energy (12 * 1 + 5 * 0,5), but the whole circuit will draw about 25W (15 * 1,75). The efficiency will be then about 60%, which is not very good.

If I were you, I'd use a conventional step-down converter (which can be made using the same 78xx regulators - have a look at their datasheets) or use a trafo with 0-6-13 outputs to power the regulators separately.
__________________
I'll improve, trust me...
  Reply With Quote
Old 16th May 2005, 01:35 AM   #3
dw1narso is offline dw1narso  Indonesia
diyAudio Member
 
Join Date: Mar 2004
Location: Jakarta
Hi Harroth,

thanks for your reply...

I'll check the 78xx datasheet then...

The main idea to use 15VAC source is to use existing transformer that I already have...

REgards,
---
David
  Reply With Quote
Old 16th May 2005, 02:30 PM   #4
Dark Harroth is offline Dark Harroth  Estonia
diyAudio Member
 
Join Date: Apr 2005
Location: Tallinn
You should also check the LM257X series step-down regulators. They tend to cost more, than the 78xx series, but they don't require so many external components, have higher efficiency, and lots of other pro's.

And you should probably be warned, that the main disadvantages of switching regulators are less stability in dynamic mode and different kinds of noise emission.
  Reply With Quote
Old 17th May 2005, 03:26 AM   #5
dw1narso is offline dw1narso  Indonesia
diyAudio Member
 
Join Date: Mar 2004
Location: Jakarta
Hi Harroth,

thanks for your advice... :-)

Are you sure that LM257X circuit will be more compact then 78XX? I check on it's datasheet, it still require some components which about the same as 78XX.

Other thing is, yesterday I bought some 7812 and 7805 (each less then @US 0.25). And at the same time the shop owner told me (and even show me) that he use the configuration that I made to power his own CDROM drive. The difference is he use only 7812 and 7805, without 7815, and got the circuit powered by car battery. So, I'm convinced that it will works... :-) Of course, noise is different issue, I will check whether it is acceptable or not...

Regards,
---
David
  Reply With Quote

Reply


Is my DIY PS proper for powering CDROM drive?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Schematics for NEC 602 CDROM Drive? fastcat95 Digital Source 144 4th October 2005 11:59 PM


New To Site? Need Help?

All times are GMT. The time now is 04:52 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki