Anyone have the 3C6A ferrite material specification Sheet

[powerbob]

If you have the ferroxcube 3C6A ferrite material specification Sheet can you please post it.

 

[powerbob]

It looks like 3C6A was renamed to 3C80. So that data sheet would be good also.

 

[dchisholm]

In several places I see the 3C80 either compared or cross-referenced to the Fair-Rite #77 material, or the TDK/nee Epcos/nee Siemens N27 material. Are the atch data sheets useful?

Dale

 

[powerbob]

Dale, the 77 is off a mile but the N27 is close enough. I was trying to follow an example in an old ap note and they did not show the spec sheet of the ferrite. The 77 only went up to 100khz and i needed core loss data at 300khz. Thanks for the help.

 

[rikkitikkitavi]

When we are at it, TDK H7B material, anybody has a clue?
I got a lot of RM14 cores in htis material.
Most interesting is a guestimate of losses vs frequency and flux density, as I can not see how any ferrite can safely be used above 300 mT. I can always measure inductance and calculate Al value by an experiment.