Smoothing Supply - diyAudio
Go Back   Home > Forums > Amplifiers > Power Supplies

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 16th April 2013, 10:08 AM   #1
DQ828 is offline DQ828  Australia
diyAudio Member
 
DQ828's Avatar
 
Join Date: Mar 2010
Location: Lake Macquarie, East Coast Australia
Default Smoothing Supply

I am using one of these XP Power SMPS to run the Arduino that controls my setup, I have been having some issues that may or may not be related to the SMPS. I thought smoothing the supply couldn't do any harm but as I know very little about these things I was hoping somebody could recommend the most appropriate configuration for the smoothing

The manufacture says the maximum capacitance the SMPS should see is 550uF, this maybe overkill but what would I know. In the reading I have been doing it seems that having a resistor involved is a good idea, but calculating the correct value is a complete mystery. I imagined a RC or a CRC is probably what I am after. All suggestions would be greatly appreciated.
Attached Images
File Type: jpg 4931009.jpg (6.1 KB, 52 views)
  Reply With Quote
Old 16th April 2013, 09:50 PM   #2
DQ828 is offline DQ828  Australia
diyAudio Member
 
DQ828's Avatar
 
Join Date: Mar 2010
Location: Lake Macquarie, East Coast Australia
I dont know how I end up with 2 threads, the internet went haywire when I was loading up the document in the other thread and I ended up with 2. Then I couldn't get back on.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Smoothing capacitors for LM3875 power supply maurycy Chip Amps 14 15th March 2012 03:05 AM
Smoothing caps cr0wl3y Tubes / Valves 2 12th January 2010 10:40 AM
Fotios need help with power supply smoothing capacitors. fotios Solid State 13 15th August 2007 02:08 AM
Problem building a power supply, no output after smoothing caps? markiemrboo Parts 11 15th January 2007 05:10 PM
HV smoothing capacitors DeXXSter Tubes / Valves 8 11th December 2001 10:10 PM


New To Site? Need Help?

All times are GMT. The time now is 11:35 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2