Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Is there any thing wrong with this design
Is there any thing wrong with this design
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 23rd February 2013, 10:43 PM   #1
tony Ma is offline tony Ma  United States
diyAudio Member
 
Join Date: Feb 2011
Default Is there any thing wrong with this design

Dear All,

I have a question with this design for PS

The input is 320 V AC and the out put is 400V DC

I am wondering why Resistor #5 (68K 3W) always very hot?

Can some one give me some clue?

tks
Attached Images
File Type: jpg hv1.jpg (42.8 KB, 290 views)
  Reply With Quote
Old 23rd February 2013, 10:58 PM   #2
TonyTecson is offline TonyTecson  Philippines
diyAudio Moderator
 
TonyTecson's Avatar
 
Join Date: May 2003
Location: Palatiw, Pasig City
Is there any thing wrong with this design
what is the dissipation of that Resistor #5 (68K 3W)? in my case, i use that 3 watt to dissipate less than 1 watt...
__________________
planet10 needs your help: Let's help Ruth and Dave...http://www.diyaudio.com/forums/plane...ml#post5010547[B
  Reply With Quote
Old 23rd February 2013, 11:18 PM   #3
vacuphile is offline vacuphile  Netherlands
diyAudio Member
 
vacuphile's Avatar
 
Join Date: Apr 2011
Location: Seaside
Does it actually work at all? I really don't see how you could subject an LM317 to these voltages. How could you send AC straight through a 10mH inductor? What happens if you put 100uF straight over AC? Where does the DC come from? Etc.
__________________
Last in distortion-free reflection.

Last edited by vacuphile; 23rd February 2013 at 11:25 PM.
  Reply With Quote
Old 23rd February 2013, 11:27 PM   #4
sofaspud is offline sofaspud  United States
diyAudio Member
 
sofaspud's Avatar
 
Join Date: Nov 2005
Location: San Antonio
That was my initial thought, too, vac. But he has a rectifier box there on the AC input. I don't understand the zener bypass, or the pot wiper to nowhere, or...
so best for me to leave it alone.
__________________
It is error only, and not truth, that shrinks from enquiry. - Thomas Paine
  Reply With Quote
Old 23rd February 2013, 11:29 PM   #5
vacuphile is offline vacuphile  Netherlands
diyAudio Member
 
vacuphile's Avatar
 
Join Date: Apr 2011
Location: Seaside
Sofaspud,thanks, had overlooked it. And you are also right about your last point.
__________________
Last in distortion-free reflection.
  Reply With Quote
Old 23rd February 2013, 11:35 PM   #6
TonyTecson is offline TonyTecson  Philippines
diyAudio Moderator
 
TonyTecson's Avatar
 
Join Date: May 2003
Location: Palatiw, Pasig City
Is there any thing wrong with this design
the zener could be a 27volt one, together with the mje13005 ensures that the vin-vout rating of the lm317 is never exceeded....
__________________
planet10 needs your help: Let's help Ruth and Dave...http://www.diyaudio.com/forums/plane...ml#post5010547[B
  Reply With Quote
Old 23rd February 2013, 11:40 PM   #7
sofaspud is offline sofaspud  United States
diyAudio Member
 
sofaspud's Avatar
 
Join Date: Nov 2005
Location: San Antonio
Sure. I should've realized. Thanks, Tony.
__________________
It is error only, and not truth, that shrinks from enquiry. - Thomas Paine
  Reply With Quote
Old 23rd February 2013, 11:43 PM   #8
TonyTecson is offline TonyTecson  Philippines
diyAudio Moderator
 
TonyTecson's Avatar
 
Join Date: May 2003
Location: Palatiw, Pasig City
Is there any thing wrong with this design
welcome, the circuit reminds me of the maida regulator....http://www.diyaudio.com/forums/tubes...regulator.html
__________________
planet10 needs your help: Let's help Ruth and Dave...http://www.diyaudio.com/forums/plane...ml#post5010547[B
  Reply With Quote
Old 23rd February 2013, 11:49 PM   #9
vacuphile is offline vacuphile  Netherlands
diyAudio Member
 
vacuphile's Avatar
 
Join Date: Apr 2011
Location: Seaside
Quote:
Originally Posted by Tony View Post
the zener could be a 27volt one, together with the mje13005 ensures that the vin-vout rating of the lm317 is never exceeded....
You are completely right!
__________________
Last in distortion-free reflection.
  Reply With Quote
Old 24th February 2013, 12:41 AM   #10
mirlo is offline mirlo  United States
diyAudio Member
 
Join Date: Jul 2002
Location: San Diego
LM 317 adjust pin is 1.25 V below output V. R5 dissipates about 2.35 W = (400-1.25)^2/68000.

The 5k pot is much too large. For 400 V out you need about 213 Ohms there, so you will be using only 4% of the pot, voltage adjustment will be way too sensitive.
  Reply With Quote

Reply


Is there any thing wrong with this designHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wrong Voltage / current on BoZ... or Wrong Measuring ? gionag Pass Labs 8 14th May 2008 12:24 PM
Is % open area the wrong parameter for ESL stator design? Few Planars & Exotics 6 23rd May 2007 10:58 PM
help!!! design a T-line enclosure for the "wrong woofer" ningures Multi-Way 4 7th October 2006 08:24 PM
Anything wrong with my first sub design? angsuman Subwoofers 9 23rd November 2005 02:38 AM
Anything wrong with this design? FrancoB Tubes / Valves 4 27th April 2005 07:50 AM


New To Site? Need Help?

All times are GMT. The time now is 09:04 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki