I put up the wrong file before: Here's the PSRR with and without bypass (10uF) on the adjust pin:
and a bode plot. Solid red line is adj pin bypassed with 10u. At the zero gain crossing there appears to be 57 deg phase margin:
An externally hosted image should be here but it was not working when we last tested it.
and a bode plot. Solid red line is adj pin bypassed with 10u. At the zero gain crossing there appears to be 57 deg phase margin:
An externally hosted image should be here but it was not working when we last tested it.
The Bode plot is what, from the unregulated HV input to the output? From the ADJ-pin network ground pin to the output?
Given that so many folks add outboard pass transistors to the LR8, using it merely as a control element, what would be the best LR8 Bode plot info to use in analyzing the loop stability and output-impedance reactive properties in that situation?
Thanks!
Given that so many folks add outboard pass transistors to the LR8, using it merely as a control element, what would be the best LR8 Bode plot info to use in analyzing the loop stability and output-impedance reactive properties in that situation?
Thanks!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.