Hey there guys!
I saved a toroidal transformer from my z-2300 logitech system and 2 10000uF 35V capacitors.
Like this on:
http://www.diyaudio.com/forums/parts/179312-help-required-logitech-z-2300-toroidal-transformer.html
I tried putting it in to a program along with one of the two capacitors + a 24ohm resistor. The program showed a output of about 28v which is perfect for the TK2050 amp (2*100w). BUT its the first time i'm operating with 230v so 'm not a 100 % on how it works.
I would like to make a home amplifier with a tk2050 board, but i'm know nothing about the amp rating of my transformer. So i'm not sure if i can use it for my TK2050 board.
So my Q is: Will this setup be able to supply the TK2050 amp? if no, why not?
thanks
I saved a toroidal transformer from my z-2300 logitech system and 2 10000uF 35V capacitors.
Like this on:
http://www.diyaudio.com/forums/parts/179312-help-required-logitech-z-2300-toroidal-transformer.html
I tried putting it in to a program along with one of the two capacitors + a 24ohm resistor. The program showed a output of about 28v which is perfect for the TK2050 amp (2*100w). BUT its the first time i'm operating with 230v so 'm not a 100 % on how it works.
I would like to make a home amplifier with a tk2050 board, but i'm know nothing about the amp rating of my transformer. So i'm not sure if i can use it for my TK2050 board.
So my Q is: Will this setup be able to supply the TK2050 amp? if no, why not?
thanks