120v 60hz 2.5a Transformer

[NEAWD]

Hi, this is my first post on here.

I recently sourced a transformer from a Sherwood RX-4109 that is rated at 120v 60hz 2.5a, and I'm wondering if this would be suitable for my LM3886 build. It's a simple stereo setup with 1 PSB and 2 amp boards. Thanks in advance guys.

 

[AndrewT]

2.5Aac & 120Vac gives ~300VA.
That would indicate a much bigger amplifier than 60W+60W into 8ohms.

The 3886 has a +-42Vdc maximum supply voltage.

Your transformer must not give out more than 28Vac -0- 28Vac when open circuit secondary and the mains voltage is at your nominal supply voltage.

If it is >28Vac you are likely to blow up your 3886 chips.

 

[NEAWD]

Thanks for the reply. That's what I suspected. I'm going to stick with a 22-0-22 300va toroidal for this project.