Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|13th June 2012, 10:23 PM||#1|
Join Date: Oct 2008
Location: Texas where blues are king
Precision Mdl E 200 C Cap Question
C4 Multisection cap on bottom
on the Precision E 200 C Signal Generator is being replaced.
C4 cap has no physical designation which is Plus nor minus and no marking
of values or which lead is ground.
C4a section scematic looks like
+ lead mouned toward the AVC Voltage + recepticle and
- lead of same cap has 300VDC back to R6 & R7 reisistors.
(Upper right, 6SL7)
C4c section schematic looks
+ on Left and
- on right to Center Tap.
C4b secton schematic looks
+ side connected to R11 and pin 2,
- side connected back to the center tap.
C4a will have 300 VDC on it, blocked by cap C4a, if correct
puzzled by the AVC + recepticle (at bottom in schematic)
has continuity with the chassis (checked with my meter).
Am I reading this schematic right? something isn't right somewhere.
(These old electrolytics are nasty they are PCB laden)
Give the Gift of Music
Last edited by SyncTronX; 14th June 2012 at 06:27 AM. Reason: spelling and title fix
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|DC blocker diode/cap orientation||Glen B||Solid State||4||22nd August 2011 06:46 PM|
|orientation of bypass cap||user_manutd||Digital Source||3||30th March 2009 05:23 PM|
|op/amp orientation question||rtate||Digital Line Level||1||2nd January 2009 09:57 PM|
|A quick BG orientation question||MikeFarad||Parts||2||2nd August 2007 05:41 AM|
|Correct orientation of feedback cap||Greg Erskine||Solid State||38||20th October 2005 03:41 PM|
|New To Site?||Need Help?|