I bought a volume control kit from ebay. When looking at the specs one should use a 9-2 V~, 3A power supply. But is 3A not a bit overrated? Should 1200 mA be enough?
Hi,
http://www.alps.com/WebObjects/catalog.woa/E/PDF/Potentiometer/MetalShaft/RMP_RK16/RMP_RK16.PDF
According to the above I'd take the blurb on ebay
as a misprint and assume it is 0.3A / 300mA.
rgds, sreten.
http://www.alps.com/WebObjects/catalog.woa/E/PDF/Potentiometer/MetalShaft/RMP_RK16/RMP_RK16.PDF
According to the above I'd take the blurb on ebay
as a misprint and assume it is 0.3A / 300mA.
rgds, sreten.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.