Hi guys,
I have got an step down transformer for my LM3886 power amplifier. it is a center taped transformer, having a secondary rated as 20V 0 20V, So after rectifying it gives me 56V total or 28 0 -28. The seller told me that the said transformer is a 6A one (whats is this current? is it surge current or anything else plz), but I am suspect if he was right or not, so How can I measure this factor by myself please?
The transformer gets hot when I connect it to my said LM3886 power amp. the power amplifier I have designed has a load of 4 ohms.
thanks a lot
I have got an step down transformer for my LM3886 power amplifier. it is a center taped transformer, having a secondary rated as 20V 0 20V, So after rectifying it gives me 56V total or 28 0 -28. The seller told me that the said transformer is a 6A one (whats is this current? is it surge current or anything else plz), but I am suspect if he was right or not, so How can I measure this factor by myself please?
The transformer gets hot when I connect it to my said LM3886 power amp. the power amplifier I have designed has a load of 4 ohms.
thanks a lot
Last edited:
If the transformer is, in fact, rated for 6 amps. it's 6 amps RMS. In this application the transformer RMS current will be much larger that the DC load current. This is because the transformer only conducts a small percentage of the time and it has very high currents while it conducts.
6A means 6A into a resistive load. A DC PSU is not a resistive load, so the transformer gets hotter. Fortunately, Class B audio amps handling normal music don't draw full current all the time so the transformer is cooler. The two effects to some extent cancel out, but how much depends on how loud and how clipped is your music. Modern CD with everything at full level and you shouldn't draw much more than 2A continuous DC from a 6A secondary. Decent recording with high dynamic range and you can draw 6A on peaks and 1A the rest of the time.
Having said that, is your amplifier oscillating? Does the amp get hot too even with no signal?
Having said that, is your amplifier oscillating? Does the amp get hot too even with no signal?
any transformer plugged in dissipates heat. supply voltage passing thru the coils which offers resistance hence the heat. for transformer sizing (va etc.) consider this link: Transformer Sizing, Transformers on Sale!.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.