Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

High Current Multi-Voltage Supply for Audio Console
High Current Multi-Voltage Supply for Audio Console
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 1st February 2012, 05:26 PM   #1
RDOGuy is offline RDOGuy
diyAudio Member
Join Date: Jan 2012
Default High Current Multi-Voltage Supply for Audio Console

First, I'd like to thank everybody in DIYAudio. I've been digging around on the site for a while - looking for ideas, and getting quite a few.

I'm getting ready to breadboard this design for a regulated mixing console power supply. For the console in question, the supply will need to provide +/-15v at 1.5a per rail, +10v at 1a, and, of course, +48 up to about 0.3a. I want it to have plenty of current headroom above those values.

Please take a look, and tell me what you think. Thanks in advance!
Attached Images
File Type: gif Mixer Power Supply Board 0100.gif (51.0 KB, 112 views)
  Reply With Quote
Old 5th February 2012, 06:59 AM   #2
Sorr is offline Sorr  Australia
diyAudio Member
Join Date: Aug 2005
I think you should use two windings and two Bridges for the +/-15V supplies.
Then you can you can use two LT1085 (or LT1086) which are much better than 317/337 types. (Amek did this with LM338's and pass transistors)
For the +10V same thing,If you must tap off for +10V come off the + supply bridge. Otherwise I would use another winding. Same applies for the +48V supply. TL783 are fine, I use a 120-330 ohm R in series with each mic socket.
After the R I use a 10-22 mfd 100V cap. Lowers the noise a bit.
  Reply With Quote


High Current Multi-Voltage Supply for Audio ConsoleHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
High voltage, high current super regulator, possible group buy peranders Group Buys 54 2nd June 2009 10:43 AM
high current vs high voltage power Clipped Car Audio 28 19th April 2007 07:06 PM
current sensing for high voltage supply sss Power Supplies 13 20th January 2007 08:10 PM
6BY5 High Voltage & High Current Choke Input Design P.S. snoopyma Tubes / Valves 7 28th June 2006 02:32 PM
High Current Variable Voltage Power Supply real Power Supplies 9 24th February 2005 11:53 PM

New To Site? Need Help?

All times are GMT. The time now is 01:20 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio