|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
1st November 2011, 12:34 PM
|
#1 |
|
diyAudio Member
Join Date: Aug 2008
|
Edcor power transformer rating
I've built a Tubelab simple se with a Edcor XPWR035 PT which has 200 mA for the HT and 5 A for the heaters.
I get about 460V B+. I wanted to try the KT120 tubes in them. The heaters can run almost 1.9A a tube, add in the 12at7 and I'm quite close to the stated amperage of the Edcor. I understand this will have the PT run hotter, but is this an early death for the PT or will it just run hotter. Are Edcors "conservatively" rated? Thanks, Paul |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Edcor and Custom Power Transformer Design | kevinkr | Tubes / Valves | 77 | 1st July 2011 10:57 PM |
| RH84 SE Build and custom Edcor power transformer | BHD | Tubes / Valves | 7 | 16th March 2011 06:54 PM |
| Edcor Universal Power Transformer for Tubelab SE | rknize | Tubelab | 43 | 19th June 2009 09:11 PM |
| Edcor OPT Voltage Rating? | sorenj07 | Tubes / Valves | 10 | 26th January 2009 07:40 PM |
| Edcor Power Transformer | rudy129 | Swap Meet | 0 | 5th December 2007 01:49 PM |
| New To Site? | Need Help? |
| Page generated in 0.07649 seconds (63.75% PHP - 36.25% MySQL) with 10 queries |
