SSLV1.1 builds & fairytales - Page 197

samoloko · 28th November 2012, 03:29 PM

merlin you tried both In series and shunt to signal, right ?

merlin el mago · 28th November 2012, 03:32 PM

I tried both as output coupling cap in my Symplistic NJFET RIAA.

samoloko · 28th November 2012, 03:40 PM

that Is series to signal
how about In Salas BIB as output and Vref filtering

merlin el mago · 28th November 2012, 03:42 PM

I use Auricap as Vref in my BiB for TP Legato I/V.

samoloko · 28th November 2012, 04:07 PM

which cap position Is more definite In BIB from your experience - Vref or Vout

merlin el mago · 28th November 2012, 04:07 PM

Vref

samoloko · 28th November 2012, 04:11 PM

thank you

merlin el mago · 28th November 2012, 04:16 PM

Film cap Vref only for analog not for digital, clocks or MC/MM preamps!!!

barrows · 28th November 2012, 04:35 PM

Thanks to merlin for recommending a decent film cap (at 10 uF) for the Vref stage for analog circuitry. I changed my BiBs to using Mundorf MKP at 10 uF for the Vref caps (also powering a Legato DAC I/V) and the improvement was very nice. I also use the Mundorf MKP at 4.7uF for the output cap. These Mundorfs are compact enough to fit without excessively long leads, even the 10 uF.
Everytime I can "move" electrolytics farther away from the analog stage, things sound better...

merlin el mago · 28th November 2012, 06:16 PM

Thanks Barrows, and viceversa for digital/clocks/MM-MC pre if you don't use 220uF or 1000uF lytic your are loosing perfomance of the reg.

28th November 2012, 04:35 PM	#1969
barrows diyAudio Member Join Date: Jul 2010	BTW... Thanks to merlin for recommending a decent film cap (at 10 uF) for the Vref stage for analog circuitry. I changed my BiBs to using Mundorf MKP at 10 uF for the Vref caps (also powering a Legato DAC I/V) and the improvement was very nice. I also use the Mundorf MKP at 4.7uF for the output cap. These Mundorfs are compact enough to fit without excessively long leads, even the 10 uF. Everytime I can "move" electrolytics farther away from the analog stage, things sound better...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Frugel-Horn Mk3 Builds & Build Questions	planet10	Full Range	814	10th May 2013 04:20 PM
Call for MyRef-C Builds & Photos	bcmbob	Chipamp	0	1st October 2010 10:57 PM
"Magga Amp Workshop" builds again (Simple 45 Project)	Niila	Tubes / Valves	1	3rd February 2009 08:51 PM
so who here builds amps	amp builder jb	Tubes / Valves	29	15th July 2005 08:23 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

28th November 2012, 03:29 PM	#1961
samoloko diyAudio Member Join Date: Jun 2006	merlin you tried both In series and shunt to signal, right ?

28th November 2012, 03:32 PM	#1962
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	I tried both as output coupling cap in my Symplistic NJFET RIAA.

28th November 2012, 03:40 PM	#1963
samoloko diyAudio Member Join Date: Jun 2006	that Is series to signal how about In Salas BIB as output and Vref filtering

28th November 2012, 03:42 PM	#1964
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	I use Auricap as Vref in my BiB for TP Legato I/V.

28th November 2012, 04:07 PM	#1965
samoloko diyAudio Member Join Date: Jun 2006	which cap position Is more definite In BIB from your experience - Vref or Vout

28th November 2012, 04:07 PM	#1966
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	Vref

28th November 2012, 04:11 PM	#1967
samoloko diyAudio Member Join Date: Jun 2006	thank you

28th November 2012, 04:16 PM	#1968
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	Film cap Vref only for analog not for digital, clocks or MC/MM preamps!!!

28th November 2012, 06:16 PM	#1970
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	Thanks Barrows, and viceversa for digital/clocks/MM-MC pre if you don't use 220uF or 1000uF lytic your are loosing perfomance of the reg.