Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Step down transformer voltage
Step down transformer voltage
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 16th December 2010, 09:59 AM   #1
Reedsmith is offline Reedsmith
diyAudio Member
Join Date: Dec 2010
Default Step down transformer voltage

Hello all

Newbie posting here. There's definitely some useful discussion going on here, (speaking as a non-techie muso, though still using a lot of old analogue hifi & recording kit).

My problem is with a new bit of gear which I got from the US, ie needing a transformer for 240v for here in the UK. It's a vintage vibraphone, which I use ok acoustically, but the resonators have a motor similar to a turntable motor, using a belt to turn the paddles in the tubes.

The motor has no rating visible, but I'm guessing it is a similar size to that of a classic turntable such as the Garrard 401. The belt is shifted manually to achieve different speeds. The transformers I've seen begin at 45v, then 100v. I'd like to set up with the right one and not burn the motor out, as it is the original, and not easy to replace.

Any technical advice would be gratefully received!

  Reply With Quote
Old 16th December 2010, 11:57 AM   #2
AndrewT is offline AndrewT  Scotland
diyAudio Member
Join Date: Jul 2004
Location: Scottish Borders
you can use an isolating transformer (= an ordinary transformer) with 230:115Vac primary to secondary.

Or you can use an autotransformer again 230:115Vac. The big disadvantage of the autotransformer is that it does NOT isolated from the mains. The outputs of the auto transformer MUST be treated as if all were LIVE.

The autotransformer is cheaper and lighter and smaller.

If you have an existing 115+115:any secondary voltage, you can convert this to become an autotransformer.
The VA rating of the 115Vac output will be ~half the VA rating of the transformer.
I suspect you need very few watts to drive your 110/120Vac equipment. Check to find the required power.
regards Andrew T.
Sent from my desktop computer using a keyboard
  Reply With Quote


Step down transformer voltageHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Step up voltage on class d ASLHK Class D 4 7th September 2008 01:02 AM
Can I use a step-up transformer as step-up? cviller Parts 5 6th September 2006 06:32 PM
Using Step Up /Down Voltage Converter? RogerWilco Solid State 1 2nd June 2006 02:47 PM
12 volt battery voltage step up ThSpeakerDude88 Power Supplies 3 2nd October 2005 03:08 AM
step up voltage segasonicfan Car Audio 9 21st August 2005 02:59 AM

New To Site? Need Help?

All times are GMT. The time now is 10:46 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio