Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

transformer primary winding turns
transformer primary winding turns
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 15th December 2010, 04:23 PM   #11
Andrew Eckhardt is offline Andrew Eckhardt  United States
diyAudio Member
 
Join Date: Nov 2005
I have purchased transformers that were very much in saturation at normal line and also maybe with 20% to go. It's Totally up in the air. If you didn't design it you can't guess, although it's easy to tell once you plug them in. No load temperature rise and noise is a dead giveaway. I have some Talema 200VA toroids that must draw a watt or less at idle, and I think I paid 10 bucks a piece for them. Then I recently bought some Dayton plate amps and had to throw out the supplied transformers because they got hot just sitting there. I think they laminated them out of tin cans and put on about 3/4 of the required primary.
  Reply With Quote
Old 15th December 2010, 07:14 PM   #12
DF96 is offline DF96  England
diyAudio Member
 
Join Date: May 2007
Quote:
Saturation in a transformer is independent of the load current.
There was a long discussion about this somewhere. The conclusion was that load current reduces core flux by creating ohmic drop in the primary. Not a huge effect, but if a mains transformer is not saturating off-load then it will not saturate at any load.
  Reply With Quote
Old 16th December 2010, 07:08 AM   #13
TonyTecson is offline TonyTecson  Philippines
diyAudio Moderator
 
TonyTecson's Avatar
 
Join Date: May 2003
Location: Palatiw, Pasig City
transformer primary winding turns
Quote:
To clarify one point.

Measuring the Primary current with the secondary open circuit. Is that the same as measuring the primary current with the secondary removed?
yes.....no load current consisting of magnetizing(exciting current) and hysterissis/eddy current losses
__________________
planet10 needs your help: Let's help Ruth and Dave...http://www.diyaudio.com/forums/plane...ml#post5010547[B
  Reply With Quote
Old 16th December 2010, 07:13 AM   #14
TonyTecson is offline TonyTecson  Philippines
diyAudio Moderator
 
TonyTecson's Avatar
 
Join Date: May 2003
Location: Palatiw, Pasig City
transformer primary winding turns
Quote:
I wind power supply transformers with a maximum of 1,2 T at 230 Vac. Mostly not over 1 T.
i wind my traffos at 0.7T, cores available in my country are not so good compared to M6 irons from the states...
__________________
planet10 needs your help: Let's help Ruth and Dave...http://www.diyaudio.com/forums/plane...ml#post5010547[B
  Reply With Quote
Old 16th December 2010, 08:43 AM   #15
davidsrsb is offline davidsrsb  Malaysia
diyAudio Member
 
Join Date: Dec 2005
Location: Kuala Lumpur
Designing for 130/260V rms WHEN HOT is probably enough
  Reply With Quote
Old 16th December 2010, 11:09 AM   #16
AndrewT is offline AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
That's the second time "hot" has been mentioned.
What is it about "hot" that makes the test condition more severe?
__________________
regards Andrew T.
  Reply With Quote
Old 16th December 2010, 12:19 PM   #17
TonyTecson is offline TonyTecson  Philippines
diyAudio Moderator
 
TonyTecson's Avatar
 
Join Date: May 2003
Location: Palatiw, Pasig City
transformer primary winding turns
there is such a thing as a 10 second rule.......if you hold the traffo in your hand and you are able to stand the heat for 10 seconds, then the traffo is not that hot.....
__________________
planet10 needs your help: Let's help Ruth and Dave...http://www.diyaudio.com/forums/plane...ml#post5010547[B
  Reply With Quote
Old 16th December 2010, 12:47 PM   #18
AndrewT is offline AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
Hi,
all my own design gear that is mains driven run with the transformer feeling almost cold.

I have touched some plug in the wall type transformers that get too hot to touch !
__________________
regards Andrew T.
  Reply With Quote
Old 16th December 2010, 12:54 PM   #19
TonyTecson is offline TonyTecson  Philippines
diyAudio Moderator
 
TonyTecson's Avatar
 
Join Date: May 2003
Location: Palatiw, Pasig City
transformer primary winding turns
these are the traffos that i have made recently:
Click the image to open in full size.
__________________
planet10 needs your help: Let's help Ruth and Dave...http://www.diyaudio.com/forums/plane...ml#post5010547[B
  Reply With Quote
Old 20th December 2010, 02:11 AM   #20
davidsrsb is offline davidsrsb  Malaysia
diyAudio Member
 
Join Date: Dec 2005
Location: Kuala Lumpur
Quote:
Originally Posted by AndrewT View Post
That's the second time "hot" has been mentioned.
What is it about "hot" that makes the test condition more severe?
Winding resistance goes up with rising temperature, causing output drop and a potential runaway problem.

I don't think iron saturation varies too much with temperature, unlike ferrite which performs badly when it gets warmer eg Powdered-Iron and Ferrite Materials for Inductor Cores Page of
  Reply With Quote

Reply


transformer primary winding turnsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Using primary as the secondary winding in the power transformer. mishak Parts 10 30th May 2010 06:55 AM
Transformer primary winding question gary h Power Supplies 4 21st December 2008 07:21 PM
Calculating Bmax and primary turns etc... guitar_joe Power Supplies 4 5th July 2007 10:06 AM
shorted turns in primary? mrshow4u Solid State 15 12th September 2006 06:09 PM
Winding toroids, turns vs core area johan Parts 2 28th September 2001 09:44 AM


New To Site? Need Help?

All times are GMT. The time now is 07:10 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki