Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

resistors for LT317 heater circuit
resistors for LT317 heater circuit
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 1st December 2010, 02:00 PM   #1
chokesrule is offline chokesrule  United Kingdom
diyAudio Member
 
Join Date: Jun 2010
Default resistors for LT317 heater circuit

Hi I am yet again tweaking my srpp lampizator...I have been reading Morgan Jones' Valve Amplifiers.....I changed the cheap rectifier diodes in my crc heater circuit to his suggested schottky diodes and heard a dramatic difference....so now I have decided to build Jones LT317 regulated heater supply (page 359)....it uses 150r and 600r to adjust the voltage to 6.3v.....Do these resistors need to be 5watt???The tubes are 6n6p and have a heater current of 750ma..sorry there are no pictures I have neither scanner or camera
  Reply With Quote
Old 1st December 2010, 07:06 PM   #2
Stixx is offline Stixx  Germany
diyAudio Member
 
Stixx's Avatar
 
Join Date: Sep 2003
Location: Southern Germany
Quote:
Originally Posted by chokesrule View Post
Hi I am yet again tweaking my srpp lampizator...I have been reading Morgan Jones' Valve Amplifiers.....I changed the cheap rectifier diodes in my crc heater circuit to his suggested schottky diodes and heard a dramatic difference....so now I have decided to build Jones LT317 regulated heater supply (page 359)....it uses 150r and 600r to adjust the voltage to 6.3v.....Do these resistors need to be 5watt???The tubes are 6n6p and have a heater current of 750ma..sorry there are no pictures I have neither scanner or camera
Resistors can be 1 Watt... when you want to be really cautious make the 600R 2Watt. Voltage drop across these resistors is very small...
  Reply With Quote
Old 1st December 2010, 07:22 PM   #3
ticknpop is offline ticknpop  Canada
diyAudio Member
 
Join Date: May 2005
Location: toronto
resistors for LT317 heater circuit
use 1k and 3.92K with 100uf for adjustment cap - slow turn on with better ripple rejection than lower value resistors ( as per Walt jung )
( assumes HV turn-on is delayed or ramped up with even longer time constant
  Reply With Quote
Old 1st December 2010, 07:28 PM   #4
Arnulf is offline Arnulf  Europe
diyAudio Member
 
Join Date: Feb 2009
These resistors have rather negligible current running through them, voltage drop across the series is identical to output voltage. They can be as small as you want them to be (1/4 W is perfectly fine). Since regulator will try to maintain 1.25V between the output and adjustment pin, one can calculate presice value for current from the value of upper reference resistor and this voltage drop by using the well-known U = R * I formula.

If this was a CCS-type heater supply (there would only be a single resistor in that case) it would have to be pretty hefty. Not so in your case (CVS).
__________________
mod verb, transitive /mod/ to state that one is utterly clueless about the operation of device to be "modded" and into "fixing" things that are not broken; "My new amplifier sounds great so I want to mod it."
  Reply With Quote
Old 1st December 2010, 09:01 PM   #5
chokesrule is offline chokesrule  United Kingdom
diyAudio Member
 
Join Date: Jun 2010
thanks for the advice...I am hoping the effort will reward me with better sound.....
  Reply With Quote

Reply


resistors for LT317 heater circuitHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Reg. Heater Circuit Bengali Tubes / Valves 2 13th October 2007 05:28 AM
resistors across the heater voltage then the middle is grounded jarthel Tubes / Valves 19 10th June 2006 07:48 PM
Heater voltage circuit change......why please frank2395 Tubes / Valves 5 25th May 2005 11:33 AM
DHT and resistors in parallel w/ heater yagoolar Tubes / Valves 13 7th November 2004 08:17 PM
lt1085,lt1033 vs lt317 337 arthur Solid State 2 9th August 2002 07:20 AM


New To Site? Need Help?

All times are GMT. The time now is 09:27 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki