Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Push-Pull Mosfet Drivers Help Needed!!!!
Push-Pull Mosfet Drivers Help Needed!!!!
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 1st December 2010, 11:55 AM   #1
Top_Gun007 is offline Top_Gun007  United Kingdom
diyAudio Member
Join Date: Nov 2006
Default Push-Pull Mosfet Drivers Help Needed!!!!

What is the best way to drive two mosfets in a push-pull configuration. The top P-ch Mosfet is connect to +30V rail and the lower N-ch Mosfet to -30V. I will be switching at 40kHz.

This is a new area for me, so any help would be a great help.

Is there a driver chip available to control both the two power mosfets (p and N)? Or must it be done in some other way?

The two Mosfets will then feed a single stage filter before delivering power to the load. Maximum output current being 15A into 1ohm.

Thank You.
  Reply With Quote
Old 1st December 2010, 11:57 PM   #2
nigelwright7557 is offline nigelwright7557  United Kingdom
diyAudio Member
nigelwright7557's Avatar
Join Date: Apr 2008
Location: Carlisle, England
Look up IR2113.
This is a high and low side driver.
It runs with two n channel mosfets.
PCBCAD51 pcb design software. 2018 version out now. http://www.murtonpikesystems.co.uk
  Reply With Quote


Push-Pull Mosfet Drivers Help Needed!!!!Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Loudspeaker drivers in push-pull StigErik Multi-Way 3 24th March 2010 01:08 PM
Push-Pull drivers for array? ted4412wilt Multi-Way 1 26th January 2009 04:27 PM
Push-Pull Output Stage MOSFET Tester lineup Solid State 2 11th September 2008 12:00 AM
Parallel Push Pull Drivers gingertube Tubes / Valves 14 13th May 2005 02:32 PM
needed: help designing push pull subwoofer ramjet Subwoofers 3 19th April 2005 12:24 AM

New To Site? Need Help?

All times are GMT. The time now is 11:28 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio