Behringer europower pmh1000 blown psu

laserlight · 21st October 2010, 08:27 PM

Hi all. I have a question about this mixer. The psu has blown and I was wondering if anyone know likely components that go. I know its a longshot but am sure their must be some engineers out there that fix them. I am an electronics engineer myself so am pretty competent when it comes to these things, but frankly, switchmodes are a bastard even with a schem so without one I def need help! anyway, the 2 cool mos transistors (17n80c3) which im assuming are the primary side chopping transistors have blown. This has also taken out R58,R59,R67,R68 surface mount. cant quite make out value but think is .47 or 47 ohms and are connected from -o/p of bridge rect to the top221p mosfet pwm controller. Also gone are R34,R43 and C7. These are just the smd's that have obviously blown by looking at them. I havent got down to checking other things with ohmeter/diode checker yet. Am I wasting my time or does anyone know if this is a classic chain of components that goes and what else should be changed?
would really appreciate any help. thanks

Tarzan · 25th October 2010, 06:04 PM

Hi Laserlight,
Write me for a schematic of the pmh1000.
It will make it a lot easier...
Cheers,
Tarzan

laserlight · 25th October 2010, 09:41 PM

thanks, I already have pmh1000 schems, but would like pmh3000 if you can get them?

robbiecando · 5th March 2011, 09:05 PM

Hi all, I have a blown power supply on my pmh1000, I could do with a schematic or a replacement power sypply. It looks like it has blown out large transistor mounted on a heatsink. near a coil it has also burnt out some resistors. blows out the mains fuse with a loud crack and flash near the cooling fan area. the board is bkackend and a bit burnt. can anybody help. email r.cwik@yahoo.co.uk

robbiecando · 5th March 2011, 10:15 PM

Hi I could use a copy of schematics for a pmh1000 r.cwik@yahoo.co.uk
Thanks

Phrog · 13th June 2011, 04:39 PM

I could use a supply to a Europower pmp980S.

hgarcia9 · 8th July 2011, 04:54 PM

Hello tarzan, could you please help us with the schematic of the PMH1000? thanks!! hugol_garco@live.com

lascc61 · 11:53 PM

Quote:

Originally Posted by laserlight

thanks, I already have pmh1000 schems, but would like pmh3000 if you can get them?

Hi,i am luis from sonora Mexico.
I´d like to know if you can send to me a copy the complete schematics of the Behringer PMX1000 ,i need to repair. My email is: lascc61@yahoo.com
Thanks in advance.
Luis.

Dizzy Kizzy · 29th March 2012, 09:04 PM

Quote:

Originally Posted by Tarzan

Hi Laserlight,
Write me for a schematic of the pmh1000.
It will make it a lot easier...
Cheers,
Tarzan

Hi Tarzan,Lazerlight and all, could you please send me a schematic for the pmh1000.the power supply is blown and I can't seem to find the parts for it. I hope the schematic will help. Would really appreciate. Thanks. Kizito kizitech@africamail.com

21st October 2010, 08:27 PM	#1
laserlight diyAudio Member Join Date: Oct 2010	Behringer europower pmh1000 blown psu Hi all. I have a question about this mixer. The psu has blown and I was wondering if anyone know likely components that go. I know its a longshot but am sure their must be some engineers out there that fix them. I am an electronics engineer myself so am pretty competent when it comes to these things, but frankly, switchmodes are a bastard even with a schem so without one I def need help! anyway, the 2 cool mos transistors (17n80c3) which im assuming are the primary side chopping transistors have blown. This has also taken out R58,R59,R67,R68 surface mount. cant quite make out value but think is .47 or 47 ohms and are connected from -o/p of bridge rect to the top221p mosfet pwm controller. Also gone are R34,R43 and C7. These are just the smd's that have obviously blown by looking at them. I havent got down to checking other things with ohmeter/diode checker yet. Am I wasting my time or does anyone know if this is a classic chain of components that goes and what else should be changed? would really appreciate any help. thanks

25th October 2010, 09:41 PM	#3
laserlight diyAudio Member Join Date: Oct 2010	pmh1000 thanks, I already have pmh1000 schems, but would like pmh3000 if you can get them?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need service manual or schematics of behringer PMH1000 mixer	fredos	Class D	18	7th October 2010 02:11 PM
Behringer Europower EP1500	sterjess	Solid State	1	27th March 2010 08:41 AM
Blown PSU in a Tek T935A scope	00940	Power Supplies	12	1st September 2009 10:24 PM
Behringer EuroPower 1500 review	longblock454	Solid State	7	24th April 2008 08:37 AM
bosoz psu ?? blown zeners ??	dqswim	Pass Labs	1	9th October 2004 02:30 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th October 2010, 06:04 PM	#2
Tarzan diyAudio Member Join Date: May 2004 Location: Genk	Hi Laserlight, Write me for a schematic of the pmh1000. It will make it a lot easier... Cheers, Tarzan

5th March 2011, 09:05 PM	#4
robbiecando diyAudio Member Join Date: Mar 2011	Hi all, I have a blown power supply on my pmh1000, I could do with a schematic or a replacement power sypply. It looks like it has blown out large transistor mounted on a heatsink. near a coil it has also burnt out some resistors. blows out the mains fuse with a loud crack and flash near the cooling fan area. the board is bkackend and a bit burnt. can anybody help. email r.cwik@yahoo.co.uk

5th March 2011, 10:15 PM	#5
robbiecando diyAudio Member Join Date: Mar 2011	Hi I could use a copy of schematics for a pmh1000 r.cwik@yahoo.co.uk Thanks

13th June 2011, 04:39 PM	#6
Phrog diyAudio Member Join Date: Apr 2011	I could use a supply to a Europower pmp980S.

8th July 2011, 04:54 PM	#7
hgarcia9 diyAudio Member Join Date: Jul 2011	Hello tarzan, could you please help us with the schematic of the PMH1000? thanks!! hugol_garco@live.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)