diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Power Supplies (http://www.diyaudio.com/forums/power-supplies/)
-   -   230VAC to 5VDC 2A SMPS power supply design needed. (http://www.diyaudio.com/forums/power-supplies/168815-230vac-5vdc-2a-smps-power-supply-design-needed.html)

Wynand 18th June 2010 08:12 AM

230VAC to 5VDC 2A SMPS power supply design needed.
 
Hi guys, I need to make a power supply that can do 5v 2-3A powered from 230VAC. This needs to be a small psu so it would probably have to be a smps design.

It's to power a GPRS module and ethernet controller.

Does anyone know of a reference design or design I could use?

Thanks for any help in the matter.

Wynand.

Sch3mat1c 18th June 2010 09:51 AM

Standard fare in most flyback controller chip appnotes. There should be one in UC3842 appnotes.

Tim

gootee 19th June 2010 10:23 PM

There should be plenty of application notes and reference designs for that at places like linear.com, and maybe national.com, among many others.

star882 21st June 2010 04:19 PM

Off-the-shelf modules are commonly available for that specification.

abraxalito 21st June 2010 04:27 PM

Quote:

Originally Posted by star882 (Post 2222957)
Off-the-shelf modules are commonly available for that specification.

Yes, I recently bought a 5V 4A brick - size 10cm * 6cm * 2.5cm for 35RMB (under $6 even with the recent Yuan revaluation). Can't see how it could possibly be worthwhile to build your own unless you have some particularly stringent noise spec for instance.


All times are GMT. The time now is 04:45 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2