diyAudio (
-   Power Supplies (
-   -   HV lab supply (

hidnplayr 17th February 2010 12:28 PM

HV lab supply
I would like to build a High voltage lab supply (60-600V, 250mA) using mosfets as the series regulator.
A current limitor should also be present (so it doesnt explode if it ever gets shorted).

Designing such a device is one thing, but making it fool-proof is another.
That's why I ask here, does anybody have a schematic of a compareable supply ? (but tested, and approved)

marce 17th February 2010 01:25 PM

I would initialy reccomend using an adjustable of the shelf convertor,

If you are going to build your own then you need to look at creepage and clearance for any PCB, exposed metal connectors etc.

Calculating Creepage and Clearance Early Avoids

Creepage and clearance distances

All times are GMT. The time now is 12:38 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2