Need high quality 12-14.4v power supply

stephenmarklay · 8th January 2010, 01:54 PM

I want to play with some active speaker building and need a lot of channels of amplification.

Just so happens I have 10 channels of ADS car amplifiers! Are there any good supplies that I can use to run these? Two of these (4 channels each) are rated at 30 amps and one at 15 (two more channels). I won't be running these hard so I don't need that kind of current but a robust supply for sure.

luka · 8th January 2010, 01:58 PM

what about car battery and good charger like ctek?

stephenmarklay · 8th January 2010, 03:38 PM

This is certainly an option but I wondered if any supplies were available.

star882 · 9th January 2010, 01:43 AM

Maybe some large PC power supplies?

woody · 9th January 2010, 03:44 AM

Look in the swap meet forum at the stinger 50 it might be what you need.

8th January 2010, 01:54 PM	#1
stephenmarklay diyAudio Member Join Date: Nov 2009	Need high quality 12-14.4v power supply I want to play with some active speaker building and need a lot of channels of amplification. Just so happens I have 10 channels of ADS car amplifiers! Are there any good supplies that I can use to run these? Two of these (4 channels each) are rated at 30 amps and one at 15 (two more channels). I won't be running these hard so I don't need that kind of current but a robust supply for sure.

9th January 2010, 01:43 AM	#4
star882 diyAudio Member Join Date: Mar 2007	Maybe some large PC power supplies? __________________ "Fully on MOSFET = closed switch, Fully off MOSFET = open switch, Half on MOSFET = poor imitation of Tiffany Yep." - also applies to IGBTs!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
11.5-12.8v to 13.8-14.4v boost	star882	Power Supplies	16	19th May 2010 03:13 AM
12-14.4v to regulated 12v & 5v	agithegreat	Power Supplies	16	2nd January 2010 02:29 AM
Need high quality prebuilt power supply for DAC	zhai	Digital Source	9	5th December 2006 12:47 PM
UCD AD180 + High Quality power supply	SEIJI	Swap Meet	1	10th September 2006 03:06 PM
High-quality power supply for a gainclone not needed ?	Blitz	Chip Amps	35	1st February 2004 09:24 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

8th January 2010, 01:58 PM	#2
luka diyAudio Member Join Date: Sep 2005 Location: in Slovenia :)	what about car battery and good charger like ctek?

8th January 2010, 03:38 PM	#3
stephenmarklay diyAudio Member Join Date: Nov 2009	This is certainly an option but I wondered if any supplies were available.

9th January 2010, 03:44 AM	#5
woody diyAudio Member Join Date: Jan 2002 Location: Tyrone Ga. U.S.A.	Look in the swap meet forum at the stinger 50 it might be what you need.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)