|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
18th August 2009, 09:03 AM
|
#1 |
|
diyAudio Member
Join Date: Jun 2003
Location: Penang
|
using meanwell SMPS S-350 as power amp PSU?
Hi guys,
Has anyone used Meanwell SMPS for their amplifier project? I'm helping a friend building a 150W stereo Class-D power amplifier and trying to keep the size down. The power rails needed is +/- 50-60V and the Meanwell S-350 seems like a good choice. I'll probably add some decoupling caps at the output of S-350 and tadaa! Please share if you've any experiences on this. http://www.domko.ru/pdf/MW/S350.pdf 
|
|
|
18th August 2009, 10:36 AM
|
#3 |
|
diyAudio Member
Join Date: Feb 2008
Location: Melbourne, Victoria, Australia
|
Iv'e used the Meanwell SMPS with 41hz amp9-basic and it works very well but that has a single ended supply. Iv'e heard good results using it with the SureElectronics 2x100W as well (single ended too).
col.
__________________
http://www.minirig.org.au |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
| New To Site? | Need Help? |
| Page generated in 0.15774 seconds (36.46% PHP - 63.54% MySQL) with 9 queries |
