|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
13th March 2009, 07:48 PM
|
#1 |
|
diyAudio Member
Join Date: Nov 2004
Location: Central Mass
|
Trygon RS60-7.5
I picked up a Trygon RS60-7.5 on ebay (as-is) and am trying to get it working.
I powered it up on a Variac and the output seems to track the input. I am getting 60V out with 60V in. In addition, with the Variac set at ~35V, the outputs swings back and forth between 20V and 30V. Step 1 - replace all the caps, including the oil can that's in there? I have a block diagram of the circuit, but no schematic. Any thoughts on where to start? Thanks! Scott... |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
| New To Site? | Need Help? |
| Page generated in 0.05503 seconds (72.62% PHP - 27.38% MySQL) with 9 queries |
