Power supply photo`s

jerryo · 8th March 2009, 08:30 AM

Hi, does any one know of any really neat examples of good hard wired power supply construction that I can look at?
I am putting one together at the moment but would like to see some photo`s. I am using 2 rectifiers (one for each secondary) and would like to see some "best practise" examples for mounting bleeder resistors and bypass caps etc.
Many thanks, Jerryo

alex mm · 20th August 2009, 09:57 AM

.... I need only one transformer and my power supply board will be ready to deliver -/+50v at 7A ....

Regards Alex

luka · 20th August 2009, 02:26 PM

alex, this one looks really good!!

peranders · 20th August 2009, 02:42 PM

Check this:
http://www.diyaudio.com/forums/showp...&postcount=374

osscar · 20th August 2009, 02:58 PM

mine DIY PCB is very simple

MUR diodes and wima caps.

[IMG]

[/IMG]

luka · 20th August 2009, 05:26 PM

Dual adjustable, PWM

One for car amp

And one for home use

poyrazoruc · 20th August 2009, 05:58 PM

Hİİ.

I need for deck amp ac/dc smps schematic.

with best regards

Redshift187 · 21st August 2009, 02:45 PM

http://www.diyaudio.com/forums/showt...91#post1520891

microsim444 · 18th November 2009, 03:34 PM

LUKA PSU will work, I have done a power supply with +-80VDC at 7AMP total power was 1120W RMS test was done on 220V 1000W halogen lamp, power supply survived successfully for 1 hour, that was a HARD test, I stoped working on that project since last year. Its intersting project, WITH FULL protection, current LIMIT, SHORT Circuit

luka · 18th November 2009, 04:19 PM

Quote:

Originally Posted by microsim444

LUKA PSU will work, I have done a power supply with +-80VDC at 7AMP total power was 1120W RMS test was done on 220V 1000W halogen lamp, power supply survived successfully for 1 hour, that was a HARD test, I stoped working on that project since last year. Its intersting project, WITH FULL protection, current LIMIT, SHORT Circuit

sweet, have anything to show?

8th March 2009, 08:30 AM	#1
jerryo diyAudio Member Join Date: Jun 2007	Power supply photo`s Hi, does any one know of any really neat examples of good hard wired power supply construction that I can look at? I am putting one together at the moment but would like to see some photo`s. I am using 2 rectifiers (one for each secondary) and would like to see some "best practise" examples for mounting bleeder resistors and bypass caps etc. Many thanks, Jerryo

20th August 2009, 02:42 PM	#4
peranders Electrons are yellow and more is better! diyAudio Member Join Date: Apr 2002 Location: Göteborg, Sweden Blog Entries: 4	Check this: http://www.diyaudio.com/forums/showp...&postcount=374 __________________ /Per-Anders (my first name) or P-A as my friends call me Tube Buffered Gainclone in work \|Thread

20th August 2009, 02:58 PM	#5
osscar diyAudio Member Join Date: May 2009 Location: Riga, LV	mine DIY PCB is very simple MUR diodes and wima caps. [IMG][/IMG] __________________ If time is money then I'm out of time

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Power Supply and Pfc Photo Gallery	luka	Power Supplies	32	27th August 2009 06:38 AM
LTspice tool for power amp power supply component evaluation	andy_c	Software Tools	2	23rd August 2009 05:10 PM
Photo flash caps for the power supply?	Original Burnedfingers	Tubes / Valves	21	8th December 2008 02:58 AM
Advice needed about Lexsen power - photo attached	Brit01	Solid State	2	28th July 2008 09:05 AM
heater supply (xformer specs are 6.3V 2.5A) as supply for a power LED?	jarthel	Tubes / Valves	10	21st July 2003 01:30 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th August 2009, 02:26 PM	#3
luka diyAudio Member Join Date: Sep 2005 Location: in Slovenia :)	alex, this one looks really good!!

20th August 2009, 05:26 PM	#6
luka diyAudio Member Join Date: Sep 2005 Location: in Slovenia :)	Dual adjustable, PWM One for car amp And one for home use

20th August 2009, 05:58 PM	#7
poyrazoruc diyAudio Member Join Date: May 2005 Location: zonguldak	Hİİ. I need for deck amp ac/dc smps schematic. with best regards

21st August 2009, 02:45 PM	#8
Redshift187 diyAudio Member Join Date: Aug 2008	http://www.diyaudio.com/forums/showt...91#post1520891

18th November 2009, 03:34 PM	#9
microsim444 Account Disabled Join Date: Oct 2008	LUKA PSU will work, I have done a power supply with +-80VDC at 7AMP total power was 1120W RMS test was done on 220V 1000W halogen lamp, power supply survived successfully for 1 hour, that was a HARD test, I stoped working on that project since last year. Its intersting project, WITH FULL protection, current LIMIT, SHORT Circuit

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read