Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Power Supply Problem/Repair
Power Supply Problem/Repair
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 1st July 2008, 05:34 AM   #1
ak_47_boy is offline ak_47_boy  Canada
diyAudio Member
Join Date: Sep 2006
Default Power Supply Problem/Repair

I have an oscilloscope with a bad switching power supply. I have it out of the scope and set up with the correct dummy loads for testing. I see no visible burnt components or capacitor leakage. The switching transistor gets very hot, i would say about 80C (180F). It should output:
+12, +12, -12, -5.2, +3.5, +5.2
I measure:
+12, +12, -2.6, -2.6, +3.5, +5.2

Old electrolytic caps? Bad regulator? It is a double sided board and quite compact so i am having a lot of trouble following traces. I think i am going to start desoldering and testing all the components individually.
  Reply With Quote
Old 1st July 2008, 06:08 AM   #2
Eva is offline Eva  Spain
diyAudio Member
Eva's Avatar
Join Date: Oct 2003
Location: Near the sea
Send a message via MSN to Eva
Find the diode that feds the negative rails, it may be the same for both, being the -5.2V one derived through a linear regulator. Check that it's not shorted.
I use to feel like the small child in The Emperor's New Clothes tale
  Reply With Quote
Old 2nd July 2008, 12:20 AM   #3
ak_47_boy is offline ak_47_boy  Canada
diyAudio Member
Join Date: Sep 2006
Tested all diodes and rectifiers. They are all good. Could they only be failing to work at high frequency?
  Reply With Quote
Old 7th July 2008, 11:36 PM   #4
star882 is offline star882  United States
diyAudio Member
star882's Avatar
Join Date: Mar 2007
Looks like an overload. Check components on negative rails for partial shorts.
"Fully on MOSFET = closed switch, Fully off MOSFET = open switch, Half on MOSFET = poor imitation of Tiffany Yep." - also applies to IGBTs!
  Reply With Quote


Power Supply Problem/RepairHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY GFP-750 Power Supply Repair roscoeiii Pass Labs 4 8th May 2009 02:10 AM
Power Supply Repair Needed childsid Power Supplies 0 10th September 2008 08:11 PM
pyle pla2200, how to repair power supply??? help please!! r0ssg Car Audio 0 14th July 2007 04:50 PM
HV power supply repair smoking-amp Tubes / Valves 1 17th February 2005 03:42 AM
Audio power supply repair tennisballg Car Audio 11 30th April 2004 01:12 AM

New To Site? Need Help?

All times are GMT. The time now is 12:48 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio