1W Boost - diyAudio
Go Back   Home > Forums > Amplifiers > Power Supplies

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 21st January 2008, 09:40 PM   #1
diyAudio Member
 
allanon77's Avatar
 
Join Date: Aug 2004
Location: Italy
Default 1W Boost

I am evaluating some solutions to have a step-up for a 1kW three phase inverter.
I have an input mains voltage of 165-265Vrms and I need a "stabilizied" at least 300Vdc for the inverter or better I could accept the low frequency ripple voltage of a simple bridge but I need at least to increase of 100V when I am at 165Vrms.
I prefer to have higher efficiency than better regulated output.
I do not need a PFC controll so I can have a direct feedback from the optput voltage.
At the moment there are two solutions in my mind:

-Low frequency Boost
a simple boost where the switching frequency could be not higher that 1kHz and the switch is driven for short time only some times before the normal charging of the bridge to have the requested 100V increase; the feedback is realized with the DSP used for the inverter, having a sensing of the ouput voltage and perhaps a sensing of the switch current.

-High frequency Boost with ZVT
I see that for this power many projects use the ZVT method in order to reduce the switching power dissipation allowing use of high frequency like e.g. 100kHz. This solution allow to have higher efficiency, better regulated output a small magnetic component but I need to pay attention of frequency ripple voltage that can disturb the current sense of the inverter.

Anyone have suggestions? Are there other interesting solutions?
Thank to anyone can help me, i do not want ready solutions but only some suggestions and possibilities to discuss about.

Allanon77
  Reply With Quote
Old 22nd January 2008, 10:13 AM   #2
diyAudio Member
 
allanon77's Avatar
 
Join Date: Aug 2004
Location: Italy
Not 1W but 1kW, I cannot modify the post so I post another one.
Sorry

Allanon77
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
11.5-12.8v to 13.8-14.4v boost star882 Power Supplies 16 19th May 2010 04:13 AM
to boost or not to boost? CharlieM Subwoofers 1 31st January 2009 07:17 PM
[enquiry] Treble Boost/High frequency Boost circuitry elnino86 Parts 2 18th December 2008 01:33 PM
1kW Boost allanon77 Power Supplies 17 4th February 2008 01:18 PM
EQ boost and Q......help Javaman Multi-Way 1 20th January 2002 03:15 PM


New To Site? Need Help?

All times are GMT. The time now is 05:44 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2