|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
12th December 2007, 11:45 AM
|
#1 |
|
diyAudio Member
Join Date: Feb 2006
Location: Belgrade
|
Ir2153
Hi.
I want ti build small half-bridge smps ( offline ) based on IR2153. I saw few schematics here on the forum ( and here, and here ) and have some questions: - Oscillator frequency for IR2153 is Fosc ~ 1/(1.4xRtxCt). But, what is switching frequency ? Is it equal to Fosc, or is it 1/2Fosc ? - Do I need small inductor in series with primary of output transformer ? What is the value of this inductor ? It probably depends on primary leakage inductance of transformer, but need to know how to choose proper value. Do I need snubber for it ? - I never saw somebody using fast diodes in gates of switching transistor ( parallel with gate resistors ) - for faster turn off. Can I add them, or there is some reason because nobody using them ? |
|
|
15th December 2007, 01:02 PM
|
#3 |
|
diyAudio Member
Join Date: Dec 2004
|
In this case Osc Freq is same as SW Freq.......
Using diodes anitiparallel with gate resistors is a good approach....for fast turn-off The inductor is used for quasi resonance mode for low emi generation i.e. soft switching.....
__________________
It's a fruitless endeavor to try and educate a fool that rejoices in ignorance
|
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Halfbridge SMPS with IR2153: Different Halbridge Topologies? | batbat | Power Supplies | 5 | 27th November 2009 04:41 PM |
| IR2153 sub | SISKO | Power Supplies | 0 | 10th May 2008 02:15 PM |
| New To Site? | Need Help? |
