Frugel Horn Solder Pointers? - diyAudio
Go Back   Home > Forums > Commercial Sector > Vendor Forums > Planet 10 hifi
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Planet 10 hifi Home of the Frugal-phile™ - Planet 10 HiFi

Reply
 
Thread Tools Search this Thread
Old 30th March 2017, 06:18 PM   #1
diyAudio Member
 
Join Date: Dec 2013
Default Frugel Horn Solder Pointers?

Anyone have pics of completed soldering jobs on the Planet 10 frugel horns? I'm plugging along on the gluing and will want to get my FE126eN2 drivers wired up soon...

Is there a kind of solder that is recommended? Most of my soldering has been for automotive.
  Reply With Quote
Old 30th March 2017, 07:19 PM   #2
chrisb is online now chrisb  Canada
diyAudio Member
 
Join Date: Aug 2002
Location: victoria BC
The solder terminal tabs on the FE126 drivers aren't designed for particularly mondo wire, and the little fiberboard strip holding them in place isn't particularly heavy duty either. I place the input terminal cups high enough on the back panel that about 1 ft of two strands of #24 solid will suffice.

I happen to use Cardas Quad Eutectic solder - a one pound roll of the older formulation will probably last me at least another 10yrs at current rate - but any decent flux core solder designed for electronics should be fine. If you have some old Kester 60/40, or Radio Shack 5% silver bearing solder you're good to go.

Be VERY careful if using something like a large Weller soldering gun -

Sorry, but I have no pictures of this to share.
__________________
on hiatus
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FE108EZ in a Frugel-horn? jjcarr Full Range 9 15th February 2015 02:41 PM
Frugel Horn kp93300 Planet 10 hifi 8 14th September 2013 06:08 PM


New To Site? Need Help?

All times are GMT. The time now is 09:25 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki