New Project

[chrisb]

Originally Posted by Ginge

Dave,

Thought your previous post about mdf was referring to me. No probs getting plywood here. Was just looking at the thread on fonkens. The ma 10.2 with oak veneer is very nice.

which they?

How are your plans going ?

Cheers

which they? - lots irons in the fire

[Ginge]

Chris,

Don't follow you.

Cheers

[chrisb]

Originally Posted by Ginge

Chris,

Don't follow you.

Cheers

ya, sometimes too cute for my own good - first question was which ma10.2 in Oak Veneer re Fonkens thread

second was - which plans? - on a good week I can get over a dozen new or slightly revised drawings that might never get widely circulated, or built here

[Ginge]

Chris,

Topsy
miniOnken/Fonken Picture Gallery.

Dave is working on a FAST system for me . Alpair 7.3's ( or the new FW125's )and two 8 inch woof's in a wooft.

Cheers

[planet10]

Originally Posted by Ginge

and two 8 inch woof's in a wooft.

Any data on the woofers yet?

dave

[Ginge]

Dave,

In previous response. Audio Technology. Can't give exact thiele data as they are oem. Audio Technology do have some parameters on the wbsite for the 8 inch flex units.

Cheers

[planet10]

Here is the midTL out of eeSTee. If not imbedded into an enclosure one needs to worry about its diffraction signature (in eeSTee it has the equivalent of 12in rediused sides)

dave

[planet10]

Originally Posted by Ginge

In previous response. Audio Technology. Can't give exact thiele data as they are oem. Audio Technology do have some parameters on the wbsite for the 8 inch flex units.

THey'll need to be measured, or we guess at a sealed enclosure and go from there.

dave

[Ginge]

Dave,

You be the judge. Don't know where to measure them. They could well be stock units .

Your going for a sealed box i see.

Where is the aluminium ?

Cheers

[Ginge]

Dave,
Need to get a set of 7.3's En to replace my set running the TV in a frugel horn. One speaker has been burnt somehow. Or would you recommend the new 125's ?

Cheers