diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Planet 10 hifi (http://www.diyaudio.com/forums/planet-10-hifi/)
-   -   Just too much stuff... SOLD (http://www.diyaudio.com/forums/planet-10-hifi/200536-just-too-much-stuff-sold.html)

planet10 25th October 2011 03:10 AM

Just too much stuff... SOLD
 
3 Attachment(s)
SOLD

Sealed 5.5 litre milliSize enclosure.

http://www.diyaudio.com/forums/attac...1&d=1319512233

15mm Baltic Birch plywood. Quarter cut white oak, Port wine stain

173x297x179 mm (6 13/16 x 11 11/16 x 7") WxHxD

Some scratches, but the big (cosmetic) damage is from falling on a back corner.

The drivers in these sold in clearance at $125/matched pair. Flat-paks (no drivers) are $150.

I'm asking $125 for the enclosures with drivers.

planet10 25th October 2011 03:42 AM

Classic Golden Ratio Mar-Ken12 with Alpair12eNS
 
1 Attachment(s)
SOLD

http://p10hifi.net/tlinespeakers/FAL...Ken12-comp.jpg

18mm Baltic Birch plywood. CGR MarKen12s are quarter cut white oak, Dark Walnut stain

276x446x185 mm (10 7/8 x 17 9/16 x 7 9/16") WxHxD

Some scratches, but pretty good. They have grills.

The drivers in these sell for $490/matched pair.

I'm asking $500 for the enclosures with drivers.

planet10 25th October 2011 04:12 AM

Mar-Ken12T with Alpair12eNC
 
1 Attachment(s)
SOLD


These represent the 1st of the trapezodal miniOnken enclosures -- actually 8-sided with the champhers and the trimmed sides.

http://p10hifi.net/tlinespeakers/FAL...herry-comp.jpg

18mm Baltic Birch plywood. Finished in cinnamon stained cherry.

281x419x257 mm (11 x 16 1/2 x 10 1/8") WxHxD

I won't guarantee they are scratch free, but they are very good. They have grills.

The drivers in these sell for $490/matched pair.

I'm asking $800 for the enclosures with drivers. Price drop to $650.

Douglas Ingram 25th October 2011 02:07 PM

Ohhh, someone's gonna LOVE those Mar-Ken12Ts!!! That is, if they sound anything like my Mar-Ken 12 Octagon "Deathstars", which they should. I'm loving mine.

planet10 25th October 2011 05:25 PM

Alpair5eNC in short transmission lines
 
1 Attachment(s)
SOLD

Part of a FAST experiment.

http://www.diyaudio.com/forums/attac...1&d=1319563517

PVC pipe. Wooden insert to mount driver in. Orange TL is friction fit and 1 has been sanded down as initial prep for finishing (clearcoat was planned)

112 Diameter x 311 mm (4 1/2 x 12 1/4)

I'm asking $50 for the enclosures with drivers. Price drop to $40

von Ah 25th October 2011 07:15 PM

Those giant Duracells could make for a sweet little omni project... :scratch2:

planet10 26th October 2011 07:14 AM

mFonken103 w FE103eN
 
1 Attachment(s)
SOLD

15mm Baltic Birch plywood. Veneered in cherry. Natural with grey drivers.

http://www.diyaudio.com/forums/attac...1&d=1319613260

173x297x179 mm (6 13/16 x 11 11/16 x 7") WxHxD

Minimal marks.

The drivers in these were only ever special order at $190/matched pair. Flat-paks (no drivers) are $150.

I'm asking $150 for the enclosures with drivers.

planet10 26th October 2011 03:40 PM

Jordan JX92s in PE Maple curved 7 litre enclosures
 
1 Attachment(s)
SOLD


http://www.diyaudio.com/forums/attac...1&d=1319643622

Tuned per Jim Griffin

In very good condition. Not sure if i can find the grills

PE Cabinet

JX92s

$300/pr

planet10 28th October 2011 07:57 AM

FonkenPrime w FE127eN with EnABLed cabinets
 
1 Attachment(s)
SOLD

http://www.diyaudio.com/forums/attac...1&d=1319788615

18mm Baltic Birch plywood. Finished in natural maple. Bud Purvine himself EnBLed the cabinets.

228x354x303 mm (9 x 14 x 12") WxHxD

In very good condition.

I'm asking $600 for the enclosures with drivers. Price drop to $500

planet10 15th November 2011 02:38 AM

Unfinished baltic birch Mar-Ken10 with Double Bevels
 
1 Attachment(s)
SOLD


18mm Baltic Birch plywood. Tops & bottoms are 3 layes of 18mm BB to accomodte the champhers. No finish, but has some of the Terry Olson Special Speaker Sauce (ie bondo) in prep for paint or veneer.

http://www.diyaudio.com/forums/attac...1&d=1321328296

Fit your Alpair 10, of Alpair 10.2 (no bezel covers) and away you go.

258x440x272 mm (10 1/4 x 17 1/4 x 10 3/4") WxHxD

Driver cutout off-centre (and not mirror imaged, no worth us trying to fix or to finish. Our mistake, your benefit.

I\'m asking $100 for the enclosures. Depending where you are, post could be as much as purchase price.


All times are GMT. The time now is 05:07 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2