• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Pensil Pics, lets show 'em!

Please, could you suggest me about the stuffing?
I put polyfill from the top to the begin of the hole, but the sound lost details of instruments and gain on the voice.

I put 410 gr for each tower. Plan say 410 gr but for each or in total?

Thank you


Inviato dal mio iPhone utilizzando Tapatalk
 
Normally, I would use Ultra-touch 1/2" denim felting in the immediate vicinity of any driver, but in this case I followed Scott's plan and used just the Acousti-stuff. Of course, one of the advantages of a completely removable back panel is the ease of access to play around with all sorts of treatment after the fact.
 
Alpair10m Pensils

3/4" Maple ply with Mahogany trim. These babies sound great with a monoprice tube amp - 8wpc!
 

Attachments

  • Jackthequack-pensil103-sm.jpg
    Jackthequack-pensil103-sm.jpg
    95.6 KB · Views: 300
Recently finished this pair of Pensils that look more like Frugals. drivers are the Pluvia 11. I must say I appreciate the bass and mids that these put out. Maybe the P11 is not as quite as detailed as some of the Mark Audio drivers but I think it is still a great driver.
Pete
 

Attachments

  • 84283A1E-99C1-4864-9337-892562DF737E.jpeg
    84283A1E-99C1-4864-9337-892562DF737E.jpeg
    672.9 KB · Views: 74
  • 91BF155C-C829-411D-8237-952D8108916A.jpeg
    91BF155C-C829-411D-8237-952D8108916A.jpeg
    649 KB · Views: 78