|
|||||||
| Home | Forums | Rules | Articles | diyAudio Store | Blogs | Gallery | Wiki | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Planet 10 hifi Home of the Frugal-phile™ - Planet 10 HiFi |
 |
|
|
Thread Tools | Search this Thread |
|
|||||||
| Home | Forums | Rules | Articles | diyAudio Store | Blogs | Gallery | Wiki | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Planet 10 hifi Home of the Frugal-phile™ - Planet 10 HiFi |
|
|
|
Thread Tools | Search this Thread |
29th July 2009, 04:58 AM
|
#1 |
|
frugal-phile(tm)
diyAudio Moderator
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
|
rFonken R & D mules with FE127eN
These are our R&D mules for the development of a replacement baffle for the Parts Express 1/2 ft^3 curved cabinet.
More pictures & details in this thread http://www.diyaudio.com/forums/showt...hreadid=148240 The FE127eN in these were new stock when installed. They have 300-400 hours esimated on them since installation. You'll have to finish the baffles yourself. (and we recommend they get glued in place once done) Comes with the stock grills, and the original baffles if you want them. The long gestation of this project led to the loss of one of the original set of allen bolts (4mm), so using the magnetically attached grills will require a bit of fiddling. There is a small amount of surface damage to one of the cabinets. $350 USD + postage. dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA |
|
|
29th July 2009, 04:59 AM
|
#2 |
|
frugal-phile(tm)
diyAudio Moderator
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
|
Closeup of the cosmetic damage
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA |
|
|
|
6th November 2010, 08:45 PM
|
#3 |
|
frugal-phile(tm)
diyAudio Moderator
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
|
I still have these. Baffles have been glued in place already for a small increase in performance.
Price dropped to $275 + postage dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA |
|
|
|
5th April 2011, 08:58 AM
|
#4 |
|
frugal-phile(tm)
diyAudio Moderator
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
|
Sold
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| rFonken -- Success & Failure | planet10 | Full Range | 9 | 31st July 2009 05:17 PM |
| Fostex FE127eN / Fonken Floorstander Mk II Questions | N1ESE | Full Range | 3 | 15th November 2008 10:36 PM |
| 1st timer building Fonken Floorstander MkII with Planet 10 FE127eN drivers | rbclark | Full Range | 33 | 24th April 2008 07:25 AM |
| New To Site? | Need Help? |
