diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Planars & Exotics (http://www.diyaudio.com/forums/planars-exotics/)
-   -   graphite based paint for ESL coating (http://www.diyaudio.com/forums/planars-exotics/89256-graphite-based-paint-esl-coating.html)

floydturbo 29th October 2006 05:54 PM

graphite based paint for ESL coating
 
Has anyone tried this paint for a coating for building Esl speakers???
Link below
http://pandrsupply.com/SearchResult.aspx?CategoryID=24

MJ Dijkstra 30th October 2006 07:54 AM

Hi

Using such graphit based products will result in a (visable) coating with a far too low resistance. Besides this, the adhesion on the Mylar is compromised. Not recommended. Some people try to remove some of the graphite with some kind of an alcohol (several types have been used) in order to get higher resistance. This method is not reproducible and fails to achieve truly high and uniform (!) resistance.

SY 30th October 2006 11:05 AM

If you want a dispersed coating, carbon black is a much better choice for a filler than graphite. It has lower conductivity and higher structure factor (i.e., it's spidery and branched). The key is the Mylar- it should be a print-treated type and, if possible, freshly corona treated.


All times are GMT. The time now is 08:21 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2