B&G Planars - diyAudio
Go Back   Home > Forums > Loudspeakers > Planars & Exotics

Planars & Exotics ESL's, planars, and alternative technologies

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th April 2004, 01:51 AM   #1
diyAudio Member
 
Join Date: Apr 2004
Location: Florida
Default B&G Planars

Ever since listening to some outstanding Quad57 speakers rebuilt by Wayne Picquet, I have been wondering if it was possible to expand the sound stage effect of my existing speakers.

Over the weekend, I found the Bohlender Greabener line of planar magnetic speakers. I am considering purchasing two of the 8" planars ( or 28" columns ) to be installed as dipole speaker units set further to the left and right of my existing KEF 104.2s. Anyone tried Augmenting Existing speakers with any success ? Or, do I just muddy the overall response with time delays and phase shift patterns ??

B&G information:
http://www.partsexpress.com/webpage....age_id=135#neo

Thanks,
  Reply With Quote
Old 28th April 2004, 04:27 AM   #2
bzdang is offline bzdang  Canada
diyAudio Member
 
bzdang's Avatar
 
Join Date: Apr 2004
Location: Pickering, Ontario
I bought a NEO8PDR to mess around with, and was a bit disappointed with it. I added it to a fostex full range driver which is mounted in a back horn. It's polite, but vertical dispersion is narrow, which is no surprise but it matters more than I expected it to. Horizontal dispersion is quite good, off-axis freq.response is good, on-axis it has a peak that bothers my wife more than it bothers me. It is perhaps more of a midrange than a tweeter, it does go fairly low without evil resonance, but highs don't have enough realism for either of us and I'll try a dome tweeter next (I imagine hearing my horn mentor groan in dismay).
The regular (non-PDR) unit and the long columns have narrower horizontal dispersion, from what I read, suggest you take that into account if choosing to try one.
__________________
Benford's law of controversy - Passion is inversely proportional to the amount of real information available.
  Reply With Quote
Old 28th April 2004, 01:40 PM   #3
diyAudio Member
 
ashok's Avatar
 
Join Date: Jun 2002
Location: 3RS
Default Neo 8 with Neo 3 ?

Hi Doc,
I sent you a message when you first posted the message.
I forgot to mention that the sound is not very bright or sharp like high end tweeters but it certainly is nice (to me). Some people have used a planar tweeter ( like the Neo 3 or possibly the PT-2 variety ) to extend the HF end. I have the PT-2 but have not had time to try the combination.

Because it is low priced you could experiment with it and a bass driver as I mentioned. The Neo 3 can always be added later if you want to. I would recommend an active crossover . It's much easier to fiddle with levels and crossover frequencies ( and slopes).
Cheers,
Ashok.
__________________
AM
  Reply With Quote
Old 28th April 2004, 01:43 PM   #4
diyAudio Member
 
Join Date: Nov 2002
Location: California
I also like the sound of a good electrostatic speaker. The neo8pdr is a good driver, and can give you a similar sound, but...

The neo8pdr has a peak between 10k and 12khz that needs to be notched.

The neo8pdr is not a tweeter, response falls after the peak.

The neo8pdr needs a tweeter, and a dipole arrangement with the neo3pdr tweeter is a bit of a problem (in my view) because the neo3pdr has been discontinued (only the non-dipole model with a back-cup remains in production, as I have been informed).
  Reply With Quote
Old 28th April 2004, 04:30 PM   #5
diyAudio Member
 
Join Date: Nov 2002
Location: California
Addressing the question "Anyone tried Augmenting Existing speakers with any success ?"

Adding a high frequency driver to an existing system generally requires a "system design" approach just like building from scratch. It is best to have measurement capabilities, but there is always the possibility to get lucky.

I have successfully replaced the tweeter of an existing system using the neo3pdr dipole driver. The new tweeter sits on top of the original speaker, along with its own crossover. The speaker now sounds much more like an electrostatic, a tremendous improvement.

Adding a neo8pdr would be much more of a challenge, but with potentially greater payoff.

Regarding the neo8pdr driver, some report good results without adding a tweeter. Some report not needing a notch filter to treat the response peak at 10k-12khz. This seems to be "listener dependent". I have tried the neo8pdr with and without the notch, and with and without a tweeter. For me, the "electrostatic sound" requires the tweeter and the notch.
  Reply With Quote
Old 29th April 2004, 10:08 AM   #6
diyAudio Member
 
Join Date: Feb 2002
Location: Germany
It should be possible to take off the back cup according to Darren.
  Reply With Quote
Old 29th April 2004, 01:11 PM   #7
diyAudio Member
 
Join Date: Nov 2002
Location: California
Regarding the dipole version of the neo3pdr:

I have exchanged email with both Parts Express and Bohlender-Graebener

According to an email I received from Parts Express,
"Yes, the 264-714's were discontinued (by the manufacturer), ..."
"Yes, the 264-735 is exactly the same element, just with a plastic rear housing attached to the back. It CAN be removed, though it is a little bit involved. At the time I was informed that BG was making the switchover, I immediately foresaw a problem for the "dipole" crowd. They assured me that the back cup can be removed if necessary. I've played around with it, and yes, it can be removed, though it will take a little bit of prying."

According to Bohlender-Graebener:

"As far as the NEO-3pdr or any other NEO-Series driver is concerned, they are all current and in full production. The particular part that Parts Express has probably identified to you as no longer being available is more than likely the one that included the faceplate or the raw driver that does not come with the back cup. Therefore the standard NEO-3 or NEO-3pdr comes with the back cup attached and if you need a faceplate that will be a separate part now."

For a design using both the neo8 and neo3pdr check out:
http://www.audax-speaker.de/pro30d.htm
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Personal Planars. tade Planars & Exotics 19 28th March 2010 03:11 AM
Advice - any kits for ESl or planars Alabama978 Planars & Exotics 7 2nd November 2008 08:04 PM
Induction planars APi Planars & Exotics 12 6th August 2007 06:53 PM
The personal planars haffe Multi-Way 32 1st February 2003 02:20 PM
q's about planars duke of dorkdom Planars & Exotics 1 28th October 2001 11:07 PM


New To Site? Need Help?

All times are GMT. The time now is 09:28 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2