Pinciple of ELS-Speakers - diyAudio
Go Back   Home > Forums > Loudspeakers > Planars & Exotics

Planars & Exotics ESL's, planars, and alternative technologies

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 10th February 2004, 12:37 PM   #1
GvTT is offline GvTT  Germany
diyAudio Member
 
Join Date: Feb 2004
Location: Stuttgart Area
Default Pinciple of ELS-Speakers

Hi,

i was wondering about some details on the principle of electrostatic speakers.

I attach the membrane to +500 V . When I apply +100V on the left and -100V on the right mesh the following happens

a) the left mesh pushes the membrane away
b) the right mesh pulls the membrane towardy itself.

I don't see how the forces relate to the difference-tensions and how the membrane-tension interferrs with the system.

What will happen if I charge the membrane with 1000V? Will I get a higher sound-level?

What will change if I apply +300 V to the left and +100 V to the right mesh?

I hope someone of you can help me understanding this problem.
Thanks a lot in advance,
with best regards

Georg v. Tardy
  Reply With Quote
Old 10th February 2004, 01:11 PM   #2
diyAudio Member
 
Join Date: Dec 2002
Location: Australia
I think i know what your getting at.
Basically, You've got to be more concerned with the strator voltage in relation to the membrane. The more the difference, the greater the force, the greater the sound level.
The tensions has more to do with resonance I think. That and the fact the a loose membrane will tend to flop around at its own will and not to the music. (I think that was one of your questions)
In relation to the 300v/100v question, the point of the push pull system is linearity. If a system had your proplem then it wouldn't be balanced (prod-pull?). In order to achieve linearity at both ends of a wave the forces must be equal in both directions. e.g 100v/ -100v.

I hope I helped a little
  Reply With Quote
Old 13th February 2004, 08:45 AM   #3
GvTT is offline GvTT  Germany
diyAudio Member
 
Join Date: Feb 2004
Location: Stuttgart Area
Question Forces between membrane and stator

Hi,

I am still confused about the forces interacting between membrane and stator:

if the membrane is connected to +700V and the statot to -200V, id the membrane pulled towards the stator or beeing pushed away?

what changes if the stator is connected to +200V?

Can anyone give me the answer? Ideally with a short physical explenation?

Thanks in advance

Georg
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Built differences between Guitar Speakers and PA Speakers? agadis PA Systems 7 24th September 2007 09:22 AM
FS : Studio One Pi Speakers aka Fred's EZ speakers Cacophonix Swap Meet 6 10th September 2007 11:56 PM
How would you compare your DIY speakers to commercial speakers? AJ Bertelson Multi-Way 20 28th May 2004 04:20 PM
Car Speakers in Theatre Speakers NEED HELP FAST!!! Psionic Multi-Way 9 3rd March 2003 12:11 PM


New To Site? Need Help?

All times are GMT. The time now is 05:08 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2