I'm not aware of any PCBs being available commercially at present. The closest are some small PCBs made by Rob McKinley at ER Audio (google).
Meantime, In case you had missed it, there was a build thread with CNC PCB stators (stealing bolsersts' links from another thread .
A few links from the thread with pics:
- First attempt at CNC segmented PCB stator: first-time-esl-builder-Post#54 (http://www.diyaudio.com/forums/planars-exotics/246846-first-time-esl-builder-6.html#post3756289)
- Final CNC results: first-time-esl-builder-Post#138 (http://www.diyaudio.com/forums/planars-exotics/246846-first-time-esl-builder-14.html#post4170947)
- Stators coated and ladder resistors installed: first-time-esl-builder-Post#159 (http://www.diyaudio.com/forums/planars-exotics/246846-first-time-esl-builder-16.html#post4195999)
***************
Meantime, In case you had missed it, there was a build thread with CNC PCB stators (stealing bolsersts' links from another thread .
A few links from the thread with pics:
- First attempt at CNC segmented PCB stator: first-time-esl-builder-Post#54 (http://www.diyaudio.com/forums/planars-exotics/246846-first-time-esl-builder-6.html#post3756289)
- Final CNC results: first-time-esl-builder-Post#138 (http://www.diyaudio.com/forums/planars-exotics/246846-first-time-esl-builder-14.html#post4170947)
- Stators coated and ladder resistors installed: first-time-esl-builder-Post#159 (http://www.diyaudio.com/forums/planars-exotics/246846-first-time-esl-builder-16.html#post4195999)
***************
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.