cls updated - diyAudio
Go Back   Home > Forums > Loudspeakers > Planars & Exotics

Planars & Exotics ESL's, planars, and alternative technologies

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 13th October 2011, 03:56 AM   #1
diyAudio Member
 
Join Date: Apr 2011
Blog Entries: 1
Default cls updated

I am new posting but not new viewing .
I collect esl speakers and mod a few.
i have two projects i am working on both are martin logan CLS 1 and 2.
Project 1. ML CLS 1 bypassing the original transformer with a plytron
esl toroid 75-1 transformer. Do i eq the speaker from scratch or modify the original ?

Project 2 ML CLS 2Z using one original transformer for bass and a toroid transformer for highs, like the acoustat MK 121 interface.
Do i use the acoustat values or other ?
both speakers will be fed bias voltage from a 120 v-6kv transformer connected to a variac for a variable 0-7.2 kv .
any input from the esl community is appreciated .
I have followed Calvin for years and wish to thank him for his inspiration
  Reply With Quote
Old 18th October 2011, 07:23 PM   #2
diyAudio Member
 
Join Date: Jan 2007
Location: Nashville
I would like to hear some thoughts on this mod ?
CLS1 owner here.
  Reply With Quote
Old 4th November 2011, 03:20 AM   #3
diyAudio Member
 
Join Date: Jan 2007
Location: Nashville
Anyone know about this ESL transformer?
  Reply With Quote
Old 5th November 2011, 12:27 PM   #4
tyu is offline tyu  United States
diyAudio Member
 
Join Date: Jul 2009
Default CLS interface Set up

I to have CLSs...An Acoustats less see if others who have Diyed ESL Well give us some input on how there interface are wired....I have found that the best sound an the most output come from runing my CSL or Acoustat Interfaces like the CLS2z were there is no Center Tap used....In All other here we see the Center tap is ran to ground...Or as we no it all ran to the Neg output of the amp none of the setups i have But the Acoustat run the earth in from with the AC...But i float that as dose ML on all i have owned...
The ML run the Frount of the panel that would be in the nom. on one end of the transfourmers winding,,,But look at the 2z ...one end of the winding is now on the neg in put..I move this to the back of the panel because the front of the panel is the only one with the bias feed on it....An it now holds the full windind it drives the front panel only.. an gives 3db more output..thay wonted the front to be ...socalled grounded.. so you would not get Zapet...just keep the phase right an it works ...fine...I now have my Acoustats runing with Two T2 for the interfaces..an one 5ohm 100w on the pos. input...just like the CLS2z... All others Caps an res are out,I find this to sound best...Now as for runing the CLS as the Acoustat 121 interfase is set up with two tranfourmers ...it dose not work well for me the CLS panel Can not move as much Air as the Acoustat...you can say what you think if you have done the setup.....An Moray James my have some input...
Attached Images
File Type: gif MK-121C_Xovr_changes[1].gif (26.2 KB, 97 views)
File Type: jpg scan0003%2520%2528Medium%2529[1][2].jpg (22.6 KB, 106 views)
File Type: gif MK-121C_Xovr[1].gif (39.5 KB, 95 views)
File Type: jpg scan0002%20(Medium)[1].jpg (23.1 KB, 95 views)
  Reply With Quote
Old 7th November 2011, 02:42 PM   #5
tyu is offline tyu  United States
diyAudio Member
 
Join Date: Jul 2009
Boy you would think that out of over 400 hits there wound be someone to give some in put.........well that life with ESLs..
  Reply With Quote
Old 7th November 2011, 06:04 PM   #6
diyAudio Member
 
Join Date: Aug 2003
Location: Calgary on the Bow
teslaboy and tyu: I worked on a pair of CLS a lot of years ago and I ended up fitting them with Acoustat Mk121 interfaces with new caps and some tweaks. That was the best configuration that I came up with at the time and they sounded much better than with the stock interface. As tyu said you cannot run a ML panel as hard as an Acoustat because the ML are curved and so not symetrically balanced stator spacing wise (small spacing on one side).
I would suggest you get a set of Acoustat interfaces and optimize them and use that as a reference while you play with your other ideas. I do think that flat panels are a better way to go by that is your decession as the ML`s do look good. See what you can do and if you can better the Acoustat interfaces I think that you will have done something special. My experience was that as soon as I ran a panel with two transformers it did not aound as good as running one transformer per panel. Hope this is of some interest. Best regards Moray James.
__________________
moray james
  Reply With Quote
Old 7th November 2011, 06:47 PM   #7
tyu is offline tyu  United States
diyAudio Member
 
Join Date: Jul 2009
Moray
Thanks for your input as always.....ANYONE ,anybody....lot of you diy guys out there,
Just say this is any ESL you have, how,s is the panel wired to the transfourmer???? Do you bring the earth in to the bias,an centap,an the neg of the amp,or float all an use just the amps neg.???
An as said thanks for your input....
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cerwin vega cls 12s no sound Jdouglas Subwoofers 3 31st March 2011 09:39 PM
Active crossover for CV! CLS-215. IceBlock Multi-Way 14 13th April 2010 06:18 PM
Martin Logan CLS panels - new Mylar trondareo Planars & Exotics 1 11th October 2009 05:34 PM
making a CLS into a Monolith? Clarkcr Planars & Exotics 2 16th February 2006 11:18 PM
CLS II to hybrid project? Clarkcr Planars & Exotics 8 28th December 2005 08:45 PM


New To Site? Need Help?

All times are GMT. The time now is 01:22 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2