DBX223 Active Crossover

dochungwell · 29th September 2011, 10:13 PM

I want to share this link for all those who are looking for an active crossover factory reconditioned for $99.00...I couldn't build one that cheap, and typically the case would sell for nearly $50.00, and it is also warranted for 2 years.

Mine just arrived so I can confirm the site is not only legit, it also arrived in three days, they are however located in Georgia.

The specs indicates the circuts is constructed utilizing the Filter type: Linkwitz-Riley, 24 dB/octave, state-variable.

The link below will take you to the site.

DBX 223 Stereo 2-Way / Mono 3-Way Crossover

Regards,
Doc

CharlieM · 30th September 2011, 01:50 PM

I have one of those. It's dead quiet and sounds superb. The only reason I'm not still using it is that it's only a two-way and when I added the Ripole subs I had to upgrade to a 3-way.

dochungwell · 1st October 2011, 01:53 AM

Hey Charlie,

I believe it should work with my set-up. I just ordered a BIC F-12 Sub,and picked up an ADCOM preamp and poweramp to deal with the High current these ESL seems to works best with.

geraldfryjr · 1st October 2011, 02:42 AM

Sweet !!!! Which ones did you get?

jer

dochungwell · 3rd October 2011, 12:35 AM

Hey Jer, the preamp is a GTP 600 and the power amp is a GFA-535II. I got these on ebay...brand new second hand...LOL

Doc

geraldfryjr · 01:10 PM

Here some specs on that amp.
It should work very well with ESL's for normal listening as it delivers decent power and scales up nicely when running into 2 ohms.

Adcom GFA-535 power amplifier Measurements | Stereophile.com

http://www.kenrockwell.com/audio/adcom/gfa-535-ii.htm

jer

29th September 2011, 10:13 PM	#1
dochungwell diyAudio Member Join Date: Sep 2010	DBX223 Active Crossover I want to share this link for all those who are looking for an active crossover factory reconditioned for $99.00...I couldn't build one that cheap, and typically the case would sell for nearly $50.00, and it is also warranted for 2 years. Mine just arrived so I can confirm the site is not only legit, it also arrived in three days, they are however located in Georgia. The specs indicates the circuts is constructed utilizing the Filter type: Linkwitz-Riley, 24 dB/octave, state-variable. The link below will take you to the site. DBX 223 Stereo 2-Way / Mono 3-Way Crossover Regards, Doc

30th September 2011, 01:50 PM	#2
CharlieM diyAudio Member Join Date: Feb 2008 Location: Savannah, GA	I have one of those. It's dead quiet and sounds superb. The only reason I'm not still using it is that it's only a two-way and when I added the Ripole subs I had to upgrade to a 3-way. __________________ http://jazzman-esl-page.blogspot.com/

10th October 2011, 01:03 PM	#6
geraldfryjr diyAudio Member Join Date: Feb 2008 Location: Jackson,michigan	Here some specs on that amp. It should work very well with ESL's for normal listening as it delivers decent power and scales up nicely when running into 2 ohms. Adcom GFA-535 power amplifier Measurements \| Stereophile.com http://www.kenrockwell.com/audio/adcom/gfa-535-ii.htm jer Last edited by geraldfryjr; 10th October 2011 at 01:10 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Best Active Crossover - Here!	Samuel Jayaraj	Multi-Way	33	13th August 2011 06:18 AM
Help with Active Crossover	fglabach	Solid State	0	15th April 2011 08:01 PM
Passive crossover into active crossover	hahfran	Multi-Way	16	10th February 2008 06:16 PM
active crossover	barossi	Multi-Way	7	14th August 2006 08:37 AM
XVR1 active crossover, discrete active stage	promitheus	Pass Labs	18	22nd July 2002 01:29 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st October 2011, 01:53 AM	#3
dochungwell diyAudio Member Join Date: Sep 2010	Hey Charlie, I believe it should work with my set-up. I just ordered a BIC F-12 Sub,and picked up an ADCOM preamp and poweramp to deal with the High current these ESL seems to works best with.

1st October 2011, 02:42 AM	#4
geraldfryjr diyAudio Member Join Date: Feb 2008 Location: Jackson,michigan	Sweet !!!! Which ones did you get? jer

3rd October 2011, 12:35 AM	#5
dochungwell diyAudio Member Join Date: Sep 2010	Hey Jer, the preamp is a GTP 600 and the power amp is a GFA-535II. I got these on ebay...brand new second hand...LOL Doc

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read