diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Planars & Exotics (http://www.diyaudio.com/forums/planars-exotics/)
-   -   High power tweeter (http://www.diyaudio.com/forums/planars-exotics/194789-high-power-tweeter.html)

gnor 17th August 2011 12:34 PM

High power tweeter
 
Dear All
I am searching for suppliers of very powerful tweeters for an industry project I am involved in.
The tweeter must be spherical shaped and produce high sound at about 15 kHz.
Can anyone give me a guide?

Thanks

picowallspeaker 17th August 2011 12:55 PM

A guide ?
Maybe a waveguide !!
Or better ...a horn !! As you didn't specify which size , it could be a 20 cm diameter sphere .
Housing a pro compression driver from ...let's see : B&C , BMS , and others .
;)

gnor 17th August 2011 01:46 PM

Sorry, I did not specify.
I am searching for a horn tweeter driver with highest possible sensitivity and output. The driver shall be mounted in a conical horn design.
Thanx

Cal Weldon 17th August 2011 02:24 PM

Is sound quality an issue? What is the budget?

gnor 17th August 2011 02:40 PM

Hi Cal
No sound quality is not an issue. The driver will not produce music, only one tone.
I can accept a higher price than a mainstream driver.
Thanx

Cal Weldon 17th August 2011 04:28 PM

The bigger the horn, the more sensitive it will be. What is the maximum size horn?

Cal Weldon 17th August 2011 04:30 PM

This Selenium might fit the bill

Selenium D3501Ti-Nd 2" Titanium Neo Horn Driver 4-Bolt 8 Ohm

Now let's find a 2" horn with a 4 bolt pattern after you answer how large it can be.

Cal Weldon 17th August 2011 04:36 PM

Never mind, I just reread your first post. Just make sure your horn is a standard 4 bolt pattern if you pick that driver. :)

gnor 18th August 2011 07:16 AM

Thank you Cal.

Sorry for my late reply. I was out kayaking in a Norwegian fjord late evening local time.

It looks promising.
Do you know who deliver such drivers at the best price?
Do you know of manufacturer and suppliers of conical horns?
Thanks again.

Cal Weldon 19th August 2011 05:22 PM

This one here but it's not very big. I wonder if someone else knows? Does it have to be conical? You can them bigger with a narrow pattern and higher sensitivity that way.

Selenium HL14-50 2" Exponential Horn 45x45 4-Bolt


All times are GMT. The time now is 01:33 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2