Help with finding Mylar film.

[bigaudioscotto]

I am trying to find some Mylar for Magnetic planar build.
Can any of you guys help with a source,also what is the best thickness.
Thanks,

 

[indianajo]

Mcmaster.com internet hardware store in Cleveland, cadillac plastics, local stock plastic distributor in big cities.

 

[bigaudioscotto]

Mcmaster.com internet hardware store in Cleveland, cadillac plastics, local stock plastic distributor in big cities.

Are you talking about this,I am not sure about how thick I need.
McMaster-Carr
Scott

 

[LAJ]

I know its still available. It used to be used in RCA TV transmitters to repair the 5762 tube sockets after the got hit by lightning.

 

[Baldin]

I just ordered this:
http://cgi.ebay.com/Electrostatic-Speaker-Membrane-Dupont-Mylar-C-6um-40M-/
280533663465?pt=Vintage_Electronics_R2&hash=item41511bfee9
Good service and fast delivery ... and quite cheap

Also look at this thread
http://www.diyaudio.com/forums/planars-exotics/182534-sources-mylar-similar-film.html#post2458201

I think that 6 um is a good compromise ... how low do you intend to go?

 

[bigaudioscotto]

I just ordered this:
http://cgi.ebay.com/Electrostatic-Speaker-Membrane-Dupont-Mylar-C-6um-40M-/
280533663465?pt=Vintage_Electronics_R2&hash=item41511bfee9
Good service and fast delivery ... and quite cheap

Also look at this thread
http://www.diyaudio.com/forums/planars-exotics/182534-sources-mylar-similar-film.html#post2458201

I think that 6 um is a good compromise ... how low do you intend to go?

That is just what I was looking at, I would like to go to 40hz if possible.
Thanks,

 

[bigaudioscotto]

Aluminum foil Tape?

Any leads on the aluminum foil tape,I found it in the states
but it is back ordered.

 

[Baldin]

If you are going to make larger bass panels (which will be needed to go to 40) you should/could consider using 12 um.
6 um I think is a good compromize for broad band mid to high. For a real tweeter section 3.5/4 or even 2 um would be even better.

(seems my last link to ebay don't work ... cut in half )
See here the selection
http://stores.ebay.com/music-in-life/_i.html?_fsub=845047013

 

[bigaudioscotto]

If you are going to make larger bass panels (which will be needed to go to 40) you should/could consider using 12 um.
6 um I think is a good compromize for broad band mid to high. For a real tweeter section 3.5/4 or even 2 um would be even better.

(seems my last link to ebay don't work ... cut in half )
See here the selection
music-in-life items - Get great deals on Electrostatic Speaker Mylar C 2um 40M Elvamide 60g items on eBay Stores!

Thanks for the info.