halbach woofer motor - diyAudio
Go Back   Home > Forums > Loudspeakers > Planars & Exotics

Planars & Exotics ESL's, planars, and alternative technologies

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 11th September 2010, 02:12 PM   #1
diyAudio Member
 
Join Date: Nov 2005
Default halbach woofer motor

In my recent erroneous post about a new magnet technology to replace neodymium there began not much of a discussion about the merits of neo magnets in speakers to begin with. I notice that Aurasound has taken it upon themselves to patent the use of neo magnets as at least one of the pole faces in an underhung speaker motor. In the interest of completely eliminating the non-oriented material in the motor, has anyone investigated the use of a double Halbach array? There is no need, necessarily, for the arrangement behind someone's name, except I thought neo magnets could not be oriented most effectively other than in the direction of their pressing before sintering, which makes a true neo horseshoe magnet impractical. The result could be thought of as two horseshoes facing each other to arrive at a pair of gaps with opposing polarity. To make most effective use of this arrangement a pair of coils would need be wound in opposite directions and centered in the two gaps. This would produce no inherent "bottom" in the magnetic path itself, although if the coils left their normal gap and approached the opposite one there would be an abrupt cone braking effect and diving of input impedance. Another plan would be to slightly extend the lower poles so that they met either by elongating the magnet there or including a very small iron spacer. This would produce only one upper gap and allow conventional coil construction.

Thougts?
  Reply With Quote
Old 11th September 2010, 04:34 PM   #2
diyAudio Member
 
Join Date: Jun 2004
Location: X
please illustrate your ideas using free Google Sketchup 3D program , a picture says more than 1000 words!

greetz - Dr. Loadstone
  Reply With Quote
Old 11th September 2010, 06:23 PM   #3
diyAudio Member
 
Join Date: Nov 2005
Alrighty. I'd have complied fully with the request but had only access to a somewhat retarded linux machine for a while, which finds it easy to make drawings that can be converted to PDF, so here ya go...
Attached Files
File Type: pdf HalbackMotor.pdf (3.4 KB, 99 views)
  Reply With Quote
Old 11th September 2010, 06:24 PM   #4
diyAudio Member
 
Join Date: Nov 2005
Hmm. The stray "C" means nothing. It must have appeared by magic.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Compact Disc Motor and Turntable - Advices for Replace and Motor Service wanted tiefbassuebertr Digital Source 5 2nd August 2010 09:19 AM
Halbach array for true ribbon tweeter. tade Planars & Exotics 4 22nd March 2010 01:19 AM
Help required for using a FDD motor as a turntable motor. binspaul Analogue Source 5 13th May 2009 03:59 AM
Lambda motor vs. XBL^2 motor vs. any other motor Thinkcat Subwoofers 16 23rd December 2008 06:23 AM
DIY TT: motor, motor PS, platter speed measurements dice45 Analogue Source 52 9th May 2006 01:07 PM


New To Site? Need Help?

All times are GMT. The time now is 02:15 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2