|Planars & Exotics ESL's, planars, and alternative technologies|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|11th July 2010, 01:21 PM||#1|
Join Date: May 2008
I would like to simulate the Bohlender Graebner Neo3 planar tweeter, does anybody where to find the parameters for this?
I've done some experiments and compaired the measured freq/imp response
with simulated curves in Basta and LspCad for the following parameters:
Fs= 870 Hz
Mms= 0.215 gram
Bl = 0.6 N/A
Cms = 0.1535 mm/N
Qes = 13.1
Qms = 0.78
Sensitivity= 93 dB
Vas = 0.125 liter
Rms = 1.50 Ns/m
Sd = 24 cm2
Qts = 0.74
Le = 0.0025 mH
Qes seems a bit high, better suggestions, anyone?
|13th July 2010, 04:14 AM||#2|
Join Date: Dec 2005
These measurements are for the NEO3-PDR, which is a bit different from the standard NEO3. The measurements were done with the tweeter in the mounting flange and the rear cup attached.
Measurements were taken a few years ago with SpeakEasy.
2.8V - SPL: 93.0
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Neo3 and Neo8 - how should they be used?||Spasticteapot||Multi-Way||1||21st May 2011 02:34 AM|
|My Neo8/Neo3 Experience||fiat79||Planars & Exotics||2||11th October 2009 11:10 AM|
|FS BG Neo3||mitchyz250f||Swap Meet||4||22nd May 2008 08:27 PM|
|WTT: BG Neo3 for BG Neo3-PDR||azngotskills||Swap Meet||0||1st December 2007 11:24 PM|
|neo8/neo3 advice||HIPCHECK||Multi-Way||0||7th November 2004 09:06 AM|
|New To Site?||Need Help?|