diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Planars & Exotics (http://www.diyaudio.com/forums/planars-exotics/)
-   -   Building / Designing my first full range esl (http://www.diyaudio.com/forums/planars-exotics/167677-building-designing-my-first-full-range-esl.html)

electros 29th May 2010 09:53 AM

Building / Designing my first full range esl
 
Hello All - longtime listner first time poster!

After admiring Quad esls I long for my own esl's, reading Wagners esl design and construction and seeing what you guys have achieved it has inspied me to build my first esl.
The electronics Ive got covered but the actual design for construction of my first full range esl panel is challenging me - I need to Know:

The size - height x width of panel

is 3mm the right size of gap between the milar and the stats?

is 3m foam tape a good way to go for spacing ang sticking milar to stats?

all and any other input / ideas would be good? :)

geraldfryjr 2nd June 2010 03:06 PM

Sorry that no one has responded to your request here is link to a compliation of threads that I just did on ESL construction info that goes back 8 pages.
if you have any questions feel free to ask. jer
here's the link,http://www.diyaudio.com/forums/plana...ml#post2205114


All times are GMT. The time now is 05:16 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2