Found a calculator on the WWW does this seem right? Second Order (12db/octave) Two-Way Crossover
Linkwitz-Riley Butterworth Bessel
High Pass Impedance: Ohms
Low Pass Impedance: Ohms
Frequency Hz
Top of page
12dB Crossover Diagram high pass C1 = µF4.1458
L1 = mH1.0610000000000002
low pass C2 = µF4.145833333333334
L2 = mH 1.0610000000000002
Linkwitz-Riley Butterworth Bessel
High Pass Impedance: Ohms
Low Pass Impedance: Ohms
Frequency Hz
Top of page
12dB Crossover Diagram high pass C1 = µF4.1458
L1 = mH1.0610000000000002
low pass C2 = µF4.145833333333334
L2 = mH 1.0610000000000002
Don't know if this one will be helpful. It's a page out of a manual I ordered from ESS years ago for the AMT 5, which may have used a similar HF unit (Power Ring). It was an updated schematic which had the latest crossover modification, raising the cutoff freq slightly for better power handling.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Planars & Exotics
- Ess ps8a